CHONGQING PINGYANG ELECTRONICS CO.,LTD. RS1A THRU RS1K FAST RECOVERY PLASTIC RECTIFIER VOLTAGE：50-800V CURRENT：1.0A FEATURES SMA(DO-214AC) ·Ideal for surface mounted applications ·Low leakage current ·Glass passivated junction .062(1.60) .055(1.40) .114(2.90) .098(2.50) .181(4.60) .157(4.00) .012(0.305) .006(0.152) .096(2.44) .078(2.00) MECHANICAL DATA ·Case: Molded plastic ·Epoxy: UL94V-0 rate flame retardant ·Terminals: Solder plated,solderable per MIL-STD- 750, Method 2026 ·Polarity: As marked ·Mounting position: Any ·Weight: 0.064 grams .060((1.52) .030(0.76) .008(0.203) .002(0.051) .208(5.28) .188(4.80) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL RS1A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Current at TA=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25°C @ TA=125°C VRRM VRMS VDC 50 35 50 RS1B RS1D RS1G RS1J 100 70 100 200 140 200 400 280 400 600 420 600 RS1K units 800 560 800 V V V Io 1.0 A IFSM 30 A VF 1.3 V 5.0 µA IR 50 30 Typical Thermal Resistance (Note3) RθJL Maximum Reverse Recovery Time (Note 2) trr 150 250 Typical Junction Capacitance (Note1) CJ 15 Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 3.Thermal Resistance (Junction to Ambient), .24in2 (6.0mm2) copper pads to each terminal １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn °C/W 500 nS pF