RS1AG DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS RS1MG TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMA ( DO-214AC ) .062(1.60) .055(1.40) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram .114(2.90) .098(2.50) .181(4.60) .157(4.00) .096(2.44) .078(2.00) .060(1.52) .030(.76) .008(0.203) .002(0.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL RS1AG RS1BG RS1DG RS1GG RS1JG RS1KG RS1MG 50 100 200 400 600 800 1000 UNITS Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 55o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum Reverse Recovery Time (Note 3) Maximum Thermal Resistance (Note 2) Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range IO 1.0 Amps I FSM 30 Amps VF 1.3 5.0 o @T A = 25 C @T A = 125 oC Volts IR trr 150 150 250 RθJL 30 CJ 15 -65 to + 175 T J , T STG NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), .24in2 (6.0mm 2 ) copper pads to each terminal. 3. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A Volts uAmps 500 nSec 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES ( RS1AG THRU RS1MG ) DC COMPONENTS CO., LTD. R