CLI300 Series ® IRED - Photosensor Photointerrupters features • rugged plastic package • hermetically sealed components • various output configurations description The CLI300 series each consist of an IRED and photosensor mounted in a black plastic housing. Each device has 12 inch leads and two holes for bracket mounting in any position. Alternate output circuits and lead lengths are available. For assistance, call Clairex. Clairex Technologies, Inc. March, 2005 absolute maximum ratings (TA = 25°C unless otherwise stated) storage and operating temperature................................................ -55°C to +100°C IRED continuous forward current ............................................................................. 60mA reverse voltage .................................................................................................... 5V continuous power dissipation(1) .................................................................... 100mW CLI325, CLI355 and CLI375 OUTPUT collector-emitter voltage..................................................................................... 30V (2) continuous collector current ......................................................................... 50mA continuous power dissipation(3) .................................................................... 200mW (4) CLI385 OUTPUT supply voltage.................................................................................................... 18V sink current ..................................................................................................... 25mA continuous power dissipation(3) .................................................................... 200mW notes: 1. Derate linearly 1.07mW/°C from 25°C free air temperature to TA = +100°C. 2. 200mA when pulsed at 1.0ms, 10% duty cycle. 3. Derate linearly 2.13mW/°C from 25°C free air temperature to TA = +100°C. 4. Buffer output. Output is LOW when input radiation is below threshold level. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Input IRED, all devices VF IR Forward voltage Reverse current min typ max units test conditions - - 1.5 10 V µA IF = 10mA VR = 5V - - 100 nA VCE = 10V, Ee = 0 - - 50 nA VCE = 10V, Ee = 0 4 - - 16 12 V mA VCC = 4.5V – 16V Output CLI325, CLI355 ID Collector-emitter dark current Output CLI375 ID Collector-emitter dark current Output CLI385 VCC ICC Supply voltage Supply current Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/16/06 Plano, Texas 75074-8524 www.clairex.com CLI300 Series ® IRED - Photosensor Photointerrupters Clairex Technologies, Inc. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter Coupled CLI325 min typ max units test conditions 3.0 - 50 1.2 - mA V µsec IF = 10mA, VCE = 5V IF = 10mA, IC = 4mA IC = 2.0mA, VCC=10V, RL = 100Ω 12.0 3.2 - 300 1.2 0.4 - V mA V V µsec IF = 10mA, IC = 4mA IF = 10mA, VCC = 5V IF = 10mA, VCC = 5V Ee = 0 IC = 2.0mA, VCC = 10V, RL =100Ω Saturation voltage 0.5 Sensor light current 1.0 Output rise and fall time 5.0 Coupled CLI385 (VCC = 5V unless otherwise noted) VOL Low level output voltage 0.4 IOH High level output leakage 5.0 IF+ IRED positive going threshold(7) 10 IF+/IF Hysteresis ratio 1.2 tr, tf Output rise and fall time 75 tPLH Propagation delay, low to high 6.0 tPHL Propagation delay, high to low 6.0 note: 6. IF = 0 equates to light path being blocked by opaque object. 7. Minimum current applied to IRED to cause output to change state. V mA µsec IF = 20mA, IC = 1mA IF = 10mA, VCE = 5V IC = 2.0mA, VCC = 10V, RL =100Ω IL VCE(sat) tr, tf Sensor light current Saturation voltage Output rise and fall time Coupled CLI355 VCE(sat) IL VO VOFF tr, tf Saturation voltage Sensor light current Voltage output across 270Ω resistor Voltage output across 270Ω resistor Output rise and fall time Coupled CLI375 VCE(sat) IL tr, tf V µA mA IOL = 15mA, IF = 0(6) IF = 15mA, VOH = 18V ns µs µs IF = 0(6) or 15mA, f = 10kHz, Duty Cycle = 50%, RL = 240Ω, CL = 15pF Schematic Configurations RED CLI325 BLUE RED CLI355 BLUE RED CLI375 BLUE RED CLI385 * BLUE GREEN GREEN 330 ohms BLACK YELLOW BLACK 270 ohms YELLOW BLACK YELLOW BLACK YELLOW * The CLI385 features an open collector, buffer, digital output. Other output functions such as inverter and internal 10K pull-up are available. Obtain a copy of the CLL Series data sheet from our website at www.clairex.com to see other available output configurations. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com