PAA190 Dual Single Pole OptoMOS® Relays Blocking Voltage Load Current Max RON PAA190 400 150 22 Description PAA190 is a dual 400V, 150mA, 22Ω 1-Form-A solid state relay. This performance leader provides high blocking voltage handling capability and improved peak load current handling, and an enhanced 5000V isolation barrier between the input and output circuits of the relay. Units V mA Ω Features • 5000VRMS Input/Output Isolation • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • Complies with: • EN 60950 • IEZC 950 • AS/NZ 3260 • EN 41003 Ordering Information Part # Description PAA190 PAA190S PAA190STR 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA190 Pinout AC/DC Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON DS-PAA190-R02.0 www.clare.com 10%+ TOFF 1 PAA190 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Typ Max Units Input Power Dissipation - - 1501 mW Input Control Current - - 50 mA - - 1 A - - 5 V Peak (10ms) Reverse Input Voltage Blocking Voltage - - 400 V Total Power Dissipation - - 8002 mW Isolation Voltage Input to Output (60 seconds) - - 5000 VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 °C Soldering Temperature 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units - IL - - 150 mA Output Characteristics @ 25°C Load Current* (Continuous) AC/DC Configuration 10ms ILPK - - 400 mA On-Resistance AC/DC Configuration Peak Load Current IL=150mA RON - - 22 Ω Off-State Leakage Current VL=400V ILEAK - - 1 µA IF=5mA, VL=10V TON - - 1 ms IF=5mA, VL=10V TOFF - - 0.5 ms 50V; f=1MHz COUT - 25 - pF Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current IL=150mA IF 5 - 50 mA Input Dropout Current - IF 0.2 0.7 - mA IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 µA - CI/O - 3 - pF Input Voltage Drop Input to Output Capacitance *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R02.0 PAA190 PERFORMANCE DATA* Device Count (N) 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 1.25 13.7 14.3 14.9 15.5 10 441.5 450.5 16.1 25 20 20 20 5 Device Count (N) 25 10 15 10 5 0 0 0.75 1.05 1.35 1.65 1.95 1.05 1.35 1.65 1.95 15 10 5 0.15 0.09 0.11 0.13 0.035 250 0.030 200 150 100 IF =10mA IF =5mA 50 -40 0.15 -20 0 20 PAA190 Typical Blocking Voltage vs. Temperature 40 60 80 100 0.010 0.005 0 120 -40 Turn-On (ms) -20 0 20 40 60 Temperature (°C) 80 100 40 60 80 100 PAA190 Typical Turn-Off vs. Temperature (Load Current = 150mADC) 0.120 0.75 5mA 10mA 0.50 0 20 PAA190 Typical Turn-On vs. Temperature (Load Current = 150mADC) 1.00 450 0 Temperature (°C) 0.140 0.25 -20 Temperature (°C) 1.25 455 0.45 0.015 1.50 460 0.39 0.020 475 465 0.33 0.025 480 470 0.27 PAA190 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 300 Turn-Off (ms) -40 0.21 Turn-On (ms) 0 0 0.07 5 2.25 Leakage (µA) Load Current (mA) 20 0.05 10 PAA190 Typical Load Current vs. Temperature 25 486.5 15 LED Current (mA) LED Current (mA) PAA190 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) 477.5 0 0.75 2.25 468.5 PAA190 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) 25 15 459.5 Blocking Voltage (V) PAA190 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) Device Count (N) Device Count (N) 15 On-Resistance (Ω) PAA190 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC) Device Count (N) 20 0 13.1 LED Forward Voltage Drop (V) Blocking Voltage (VRMS) 25 5 Turn-Off (ms) Device Count (N) 30 PAA190 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 PAA190 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 150mADC; IF = 5mADC) PAA190 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 0.100 0.080 0.060 0.040 0.020 -40 -20 0 20 40 60 Temperature (°C) 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (°C) * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02.0 www.clare.com 3 PAA190 PERFORMANCE DATA* PAA190 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) 1.8 PAA190 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.40 0.12 0.35 1.4 50mA 1.2 0.25 0.20 0.15 0.10 10mA 5mA 1.0 0.10 0.30 Turn-Off (ms) 1.6 Turn-On (ms) LED Forward Voltage Drop(V) PAA190 Typical LED Forward Voltage Drop vs. Temperature 0.05 0.8 0.08 0.06 0.04 0.02 0 -40 -20 0 20 40 60 80 100 120 0 5 10 Temperature (°C) 15 20 25 30 35 40 45 50 0 0 LED Forward Current (mA) 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PAA190 Typical IF for Switch Operation vs. Temperature (Load Current = 150mADC) 20 LED Current (mA) On-Resistance (Ω) 25 15 10 5 3.000 3.000 2.500 2.500 2.000 1.500 1.000 -20 0 20 40 60 80 -40 100 150 -20 0 20 40 60 80 100 PAA190 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC 1.000 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) 1.500 0 0 -40 2.000 0.500 0.500 0 PAA190 Energy Rating Curve 1.2 1.0 100 Load Current (A) Load Current (mA) PAA190 Typical IF for Switch Dropout vs. Temperature (Load Current = 150mA) LED Current (mA) PAA190 Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) 50 0 -50 0.8 0.6 0.4 0.2 -100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02.0 PAA190 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 3.302 7.620 ± 0.127 6.350 ± 0.127 (0.130) 7.239 TYP. 8-0.800 DIA. (0.100 ± 0.005) (8-0.031 DIA.) 9.144 ± 0.508 6.350 ± 0.127 (0.285 TYP.) (0.300 ± 0.005) (0.250 ± 0.005) (0.360 ± 0.020) (0.250 ± 0.005) 9.144 TYP. 7.620 ± 0.127 (0.360 TYP.) (0.300 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005 ) 9.652 ± 0.381 8 Pin DIP Surface Mount (“S” Suffix) PC Board Pattern (Top View) 2.540 ± 0.127 (0.380 ± 0.015) (0.100 ± 0.005) 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 4.445 ± 0.127 (0.175 ± 0.005) 3.302 6.350 ± 0.127 (0.130) (0.250 ± 0.005) 9.525 ± 0.254 8.305 ± 0.127 (0.375 ± 0.010) (0.327 ± 0.005) 1.905 ± 0.127 0.635 TYP. (0.025 TYP.) (0.075 ± 0.005) 0.254 TYP. (0.010 TYP.) 0.457 ± 0.076 1.498 ± 0.127 (0.018 ± 0.003) (0.059 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) Dimensions mm (inches) R02.0 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. W = 16.30 max (0.004 MAX.) 1 8 (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier K = 4.2 Embossment P = 12.00 Ao = 10.30 (0.472) (0.406) User Direction of Feed 1 (0.165) K = 4.90 0 (0.193) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA190-R02.0 ©Copyright 2003, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/18/03