CONNOR-WINFIELD EE94-543G5-S

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
CW
0629
EE94-543G5
155.52M
SURFACE MOUNT 3.3V LVPECL CLOCK
ABSOLUTE M AXIMUM RATING S
TABLE 1.0
PARAMETER
UNITS
Storage Temperature
Supply Voltage
(Vcc)
MODEL SPECIFICATIONS :
MODEL EE94-51*G5
Center Frequency
Total Frequency Tolerance
MODEL EE94-53*G5
Center Frequency
Total Frequency Tolerance
MODEL EE94-54*G5
Center Frequency
Total Frequency Tolerance
MINIMUM
NOMINAL
MAXIMUM
UNITS
-55
-
125
°C
-0.5
-
7.0
Vdc
NOTE
TABLE 2.0
* Added pin connection option number. See table 8
(Fo)
13
167
-25
25
MHz
ppm
1
* Added pin connection option number. See table 8
(Fo)
13
200
-50
50
MHz
ppm
1
* Added pin connection option number. See table 8
(Fo)
13
200
-100
100
MHz
ppm
1
* Added pin connection option number. See table 8
(Fo)
13
167
-20
20
MHz
ppm
1
Center Frequency
Total Frequency Tolerance
MODEL EE94-52*G5
EE94-51xG5-Series
EE94-52xG5-Series
EE94-53xG5-Series
EE94-54xG5-Series
DESCRIPTION
The Connor Winfield EE945xxG5-series is a fixed frequency
10 pad surface mount Crystal
Controlled Oscillator (XO)
designed for applications
requiring low jitter and tight
frequency stability. Operating at
3.3V supply voltage, the EE945xxG5-series provides option for
LVPECL differential outputs
and/or an enable / disable
function.
FEATURES
OPERATING SPECIFIC ATIONS
TABLE 3.0
PARAMETER
MINIMUM
NOMINAL
MAXIMUM
UNITS
0
-
70
°C
Operating Temperature Range
NOTE
OVERALL FREQUENCY TOLERANCE:
EE94-51xG5 - ±25PPM
EE94-52xG5 - ±50PPM
EE94-53xG5 - ±100PPM
EE94-54xG5 - ±20PPM
Supply Voltage
(Vcc)
3.135
3.3
3.465
Vdc
Supply Current
(Icc)
-
-
60
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
pS RMS
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
-
-60
-100
-130
-140
1
-
pS RMS
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
-
-
Vdc
2
1.68
Vdc
2
TEMPERATURE RANGE: 0 to 70°C
LVPECL DIFFERENTIAL OUTPUTS
ENABLE / DISABLE INPUT CHARACTERISTICS
ENABLE/DISABLE FUNCTION
Disable Input Voltage (High)
(Vih)
2.275
Enable Input Voltage (Low)
(Vil)
-
LVPECL OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
Duty Cycle
Rise / Fall Time 20% to 80%
(Voh)
(Vol)
TABLE 4.0
MINIMUM
2.275
45
-
NOMINAL
50
-
MAXIMUM
50
1.68
55
1
UNITS
Ohms
Vdc
Vdc
%
ns
PACKAG E CHARACTERISTICS
NOTE
3
TAPE AND REEL PACKAGING
ORDERING INFORMATION
TABLE 6.0
Soldering Process
SURFACE MOUNT PACKAGE
4
Hermetically sealed, leadless ceramic package.
PROCESS RECOMMENDATIONS
LOW JITTER <1pS RMS
RoHS 5/6 COMPLIANT
TABLE 5.0
Package
3.3V OPERATION
See solder profile page 2.
EE94-543G5 - 155.52MHz
LVPECL
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Ec230
PAGE 1
OF
2
REV:
01
DATE:
07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Notes
1) Inclusive of calibration tolerance @ 25°C, frequency vs. temperature, frequency vs. change in supply voltage,
frequency vs. load variations, shock and vibration and 10 years aging.
2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high
state (VoH).
3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent.
4) Duty Cycle measured at 1.977V
Options Chart
(Replace the x with an option number)
Pin Connections
Output Waveform
“1” LEVEL
“0” LEVEL
Pin
1
2
3
4
5
6
7
8
9
10
TABLE 7.0
Connection
N/C
Option Pin
N/C
Ground (Vee)
N/C
Option Pin
Q Output
N/C
+ Supply (Vcc)
N/C
TABLE 8.0
Option Number
0
1
2
3
4
Option Description:
Pin 2 and Pin 6: No Connection
Pin 6 Complementary Output, Pin 2 No Connection
Pin 2 Enable / Disable Function, Pin 6 No Connection
(Note: When oscillator is disabled the output, pin 7 is in a high
state (Voh).
Pin 2 Complementary Output, Pin 6 No Connection
Pin 2 Enable / Disable Function, Pin 6 Complementary Output
(Note: When oscillator is disabled the output pin 7 is in a high
state (Voh) and pin 6 is in a low state(Vol).
Dimensional Tolerance:
±.005” (.127mm)
Package Outline
CW
0629
EE94-543G5
155.52M
Suggested Pad Layout
Solder Profile
Test Circuit
Ramp-Up Rate
Temperature 3°C/second max.
from 150°C to 225°C.
225°C
225°C
tp
Ramp-Down Rate
6°C/second max.
183°C
150°C
Q
100°C
25°C
Q
Option
Pin
0
Time
60-120s
Max.
10-30s
60-150s Max.
360 Sec. Max.
Specifications subject to change without notice.
DATA SHEET #:
Ec230
PAGE 2
OF
2
REV: 01
DATE:
07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.