THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS X403M2 622.08 3.3V SURFACE MOUNT 5.0 x 7.5mm LVPECL CLOCK OSCILLATOR ABSOLUTE M AXIMUM RATING S PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C Storage Temperature Supply Voltage (Vcc) -0.5 - 7.0 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc OPERATING SPECIFIC ATIONS NOTE DESCRIPTION TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range X403 TABLE 1.0 (Fo) MINIMUM 250 -20 0 NOMINAL - MAXIMUM 700 20 70 UNITS MHz ppm °C Vdc NOTE 1 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 10 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS SSB Phase Noise at 10Hz offset - -75 - dBc/Hz SSB Phase Noise at 100Hz offset - -95 - dBc/Hz SSB Phase Noise at 1KHz offset - -110 - dBc/Hz SSB Phase Noise at 10KHz offset - -125 - dBc/Hz SSB Phase Noise at 100KHz offset - -120 - dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS NOTE - 1.68 Vdc 2 - Vdc 2 INPUT CHARACTERISTICS The Connor Winfield X403 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a +/-20ppm 0 to 70°C overall stability, LVPECL Differential Outputs and Tristate Enable / Disable function. The X403 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. TABLE 3.0 PARAMETER Disable Input Voltage (Low) (Vil) - Enable Input Voltage (High) (Vih) 2.275 3.3V OPERATION PECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% FEATURES TABLE 4.0 (Voh) (Vol) MINIMUM 2.275 45 - NOMINAL 50 0.5 MAXIMUM 50 1.68 55 1.0 UNITS Ohms Vdc Vdc % nS NOTE 3 DIFFERENTIAL LVPECL OUTPUTS LOW JITTER <2pS RMS 4 TOTAL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: 0 to 70°C ENABLE / DISABLE FUNCTION PACKAG E CHARACTERISTICS TABLE 5.0 Hermetically sealed ceramic package and metal cover. Package Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION Enable / Disable Function Enable / Disable Function (Pad 1) High or Open Low X403 TABLE 6.0 Output Enable Disable (High Impedance) LVPECL CLOCK SERIES - 622.08M CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec221 PAGE 1 OF 2 REV: 01 DATE: 03/02/07 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline and Dimensions Pin Connections X403 M2 622.08 Pin 1 2 3 4 5 6 TABLE 7.0 Connection N/C Enable / Disable Ground Q Output Q Output Vcc Dimensional Tolerance: ±.005 (.127mm) Suggested Pad Layout Output Waveform 80% 50% 20% Solder Profile Test Circuit Temperature 260°C 260°C 220°C 180°C 150°C 120°C 1 2 N/C 0 E/D 120 S Max. 10 S Time 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Ec221 PAGE 2 OF 2 REV: 01 DATE: 03/02/07 aCopyright 2001 Connor-Winfield all rights reserved.