CONNOR-WINFIELD MSD53A4G5

THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CW
0629
MSD53A4G5
77.76M
CRYSTAL CONTROLLED OSCILLATORS
3.3V SURFACE MOUNT LVCMOS CLOCK OSCILLATOR
MSD53A4G5
ABSOLUTE M AXIMUM RATING S
PARAMETER
Storage Temperature
Supply Voltage
TABLE 1.0
UNITS
MINIMUM
-55
NOMINAL
-
MAXIMUM
125
UNITS
°C
(Vcc)
-0.5
-
7
Vdc
MINIMUM
1.8
-100
0
NOMINAL
-
MAXIMUM
156.25
100
70
UNITS
MHz
ppm
°C
OPERATING SPECIFIC ATIONS
NOTE
DESCRIPTION
TABLE 2.0
PARAMETER
Frequency Range
Total Frequency Tolerance
Operating Temperature Range
(Fo)
Supply Voltage
(Vcc)
2.97
3.3
3.63
Vdc
Supply Current
Jitter (BW=10Hz to 20MHz)
Jitter (BW=12kHz to 20MHz)
SSB Phase Noise at 10Hz offset
SSB Phase Noise at 100Hz offset
SSB Phase Noise at 1KHz offset
SSB Phase Noise at 10KHz offset
SSB Phase Noise at 100KHz offset
(Icc)
-
-60
-90
-125
-135
-140
50
5
1
-
mA
ps rms
ps rms
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
NOTE
1
The Connor-Winfield
MSD53A4G5 is a hermetically
sealed surface mount 3.3V
Crystal Controlled Oscillator
(XO) HCMOS/TTL Compatible.
The MSD53A4G5 is designed
for applications requiring low
jitter and tight stability.
FEATURES
INPUT CHARACTERISTICS
TABLE 3.0
PARAMETER
MINIMUM
NOMINAL
MAXIMUM
UNITS
NOTE
Tri-state Enable Voltage
(Vih)
>70%Vcc
-
-
Vdc
2
Tri-state Disable Voltage
(Vil)
-
-
<30%Vcc
Vdc
2
3.V OPERATION
LOW JITTER <1ps RMS
FREQUENCY TOLERANCE: ±100ppm
LVCMOS OUTPUT CHARACTERISTICS
PARAMETER
LOAD
Voltage
(High)
(Low)
TABLE 4.0
(Voh)
(Vol)
Current
(High)
(Low)
Duty Cycle at 50% of Vcc
Rise / Fall Time 10% to 90%
MINIMUM
? 0.9(Vcc)
-
NOMINAL
-
MAXIMUM
15
? 0.1(Vcc)
UNITS
pF
Vdc
Vdc
-16
45
-
50
1.5
16
55
3
mA
mA
%
nS
(Ioh)
(Ioh)
PACKAG E CHARACTERISTICS
Package
NOTE
TEMPERATURE RANGE: 0 to 70°C
TRI-STATE ENABLE/DISABLE
FUNCTION
TAPE AND REEL PACKAGING
RoHS 5/6 COMPLIANT
TABLE 5.0
Hermetically sealed, ceramic package with gold plated J leads.
PROCESS RECOMMENDATIONS
TABLE 6.0
Soldering Process
ORDERING INFORMATION
See solder profile page 2.
MSD53A4G5 - 77.76 MHz
Note:
1) Inclusive of calibration, frequenc y vs. temperature stability, suppl y voltage change, load
change, shock and vibration, 20 years aging.
2) Oscillator output is enabled with no connection on pad 1
LVCMOS
CLOCK
SERIES
CENTER
FREQUENCY
Specifications subject to change without notice.
DATA SHEET #:
Hc208
PAGE 1
OF
2
REV: 01
DATE:
07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
PRODUCT
D AT A
SHEET
CRYSTAL CONTROLLED OSCILLATORS
Pin Connections
Package Outline
CW
0629
MSD53A4G5
77.76M
Pin
1
2
3
4
TABLE 7.0
Connection
Enable / Disable
Ground
Output
Vcc
Enable / Disable Function (Pad 1)
High or Open
Low
TABLE 8.0
Output
Enable
Disable (High Impedance)
Dimensional Tolerance:
±.005” (.127mm)
Output Waveform
Suggested Pad Layout
Test Circuit
Solder Profile
Ramp-Up Rate
Temperature 3°C/second max.
from 150°C to 225°C.
225°C
225°C
tp
Ramp-Down Rate
6°C/second max.
183°C
150°C
4
1
100°C
3
15 pF
2
25°C
E/D
0
Time
60-120s
Max.
10-30s
60-150s Max.
360 Sec. Max.
Specifications subject to change without notice.
DATA SHEET #:
Hc208
PAGE 2
OF
2
REV: 01
DATE:
07/27/06
aCopyright 2001 Connor-Winfield all rights reserved.