THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS X410 0702 400MHZ 2.5V SURFACE MOUNT 5.0 x 7.5mm LVPECL CLOCK OSCILLATOR X410 DESCRIPTION ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS 250 -20 -50 0 - - 400 20 50 70 MHz ppm ppm °C Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFICATIONS NOTE TABLE 2.0 PARAMETER Center Frequency Frequency Calibration @ 25°C Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 2.375 2.500 2.625 Supply Current (Icc) - 60 90 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS SSB Phase Noise at 10Hz offset - -45 - dBc/Hz SSB Phase Noise at 100Hz offset - -85 - dBc/Hz SSB Phase Noise at 1KHz offset - -115 - dBc/Hz SSB Phase Noise at 10KHz offset - -135 - dBc/Hz SSB Phase Noise at 100KHz offset - -140 - dBc/Hz (Voh) (Vol) PACKAGE CHARACTERISTICS Package 1 FEATURES 2.5V OPERATION LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% NOTE The Connor Winfield X410 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a +/-50ppm overall stability. Operating at 2.5V supply voltage, the X410 provides LVPECL Differential Outputs. TABLE 3.0 MINIMUM 1.475 45 - NOMINAL 50 0.5 MAXIMUM 50 0.880 55 1 UNITS Ohms Vdc Vdc % nS NOTE 2 DIFFERENTIAL LVPECL OUTPUTS LOW JITTER <1pS RMS 3 FREQUENCY CALIBRATION @ 25°C: ±20ppm TOTAL FREQUENCY TOLERANCE: ±50ppm TEMPERATURE RANGE: 0 to 70°C TABLE 4.0 Hermetically sealed ceramic package and metal cover. SURFACE MOUNT PACKAGE PROCESS RECOMMENDATIONS Soldering Process See Solder Profile page 2. TAPE AND REEL PACKAGING Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 3) Duty Cycle measured at 50% of output swing. RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION X410 LVPECL CLOCK SERIES - 400.0M CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec222 PAGE 1 OF 2 REV: 03 DATE: 06/01/07 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline and Dimensions Pin Connections TABLE 5.0 Connection N/C N/C Ground Q Output Q Output Vcc X410 0702 400MHZ Pin 1 2 3 4 5 6 Dimensional Tolerance: ±.005 (.127mm) Suggested Pad Layout Output Waveform Duty Cycle 45 / 55 45 / 55 Q C1 80% 50% C2 Pin 1 20% Q Top View tr tf Solder Profile Test Circuit Temperature 260°C 260°C 250 Ohm 220°C 180°C 150°C C2 0.01 uF C1 330 pF 62.5 Ohm 6 5 4 High Impedance Probe 120°C 250 Ohm 1 2 3 N/C N/C 0 62.5 Ohm High Impedance Probe 120 S Max. Vcc1 and Vcc2 = 2.5 Vdc 10 S Time 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Ec222 PAGE 2 OF 2 REV: 03 DATE: 06/01/07 aCopyright 2001 Connor-Winfield all rights reserved.