THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0715 FPLD54TBX4 466.56M 3.3V SURFACE MOUNT LVPECL CLOCK FPLD54TBX4 ABSOLUTE M AXIMUM RATING S TABLE 1.0 PARAMETER UNITS Storage Temperature Supply Voltage (Vcc) Input Voltage MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc -0.5 - Vcc+0.5 Vdc NOTE DESCRIPTION OPERATING SPECIFIC ATIONS TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) MINIMUM 200 -20 0 NOMINAL - MAXIMUM 800 20 70 UNITS MHz ppm °C Vdc NOTE 1 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 80 mA Jitter (BW=10Hz to 20MHz) - - 10 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS SSB Phase Noise at 10Hz offset - -75 - dBc/Hz SSB Phase Noise at 100Hz offset - -95 - dBc/Hz SSB Phase Noise at 1KHz offset - -110 - dBc/Hz SSB Phase Noise at 10KHz offset - -125 - dBc/Hz SSB Phase Noise at 100KHz offset - -120 - dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS NOTE INPUT CHARACTERISTICS FEATURES TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) 2.275 Vdc 2 (Vil) - - - Enable Input Voltage (Low) 1.68 Vdc 2 MINIMUM 2.275 45 - NOMINAL 50 0.5 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) The Connor-Winfield FPLD54TBX4 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD54TBX4 provides LVPECL Differential Outputs with Enable/Disable function. TABLE 4.0 NOTE 3 4 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS DISABLE FUNCTION PAD 2 LOW JITTER <2pS RMS OVERALL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING PACKAG E CHARACTERISTICS TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. Package PROCESS RECOMMENDATIONS TABLE 6.0 Soldering Process Wash See solder profile page 2. Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output and the complementary output are in the high impedance state. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V RoHS 5/6 COMPLIANT ORDERING INFORMATION FPLD54TBX4 - 466.56M LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec204 PAGE 1 OF 2 REV: 01 DATE: 04/11/07 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Suggested Pad Layout CW FPLD54TBX4 466.56M Package Outline Output Waveform Pin Connections 80% N/C ENABLE / DISABLE GROUND Q OUTPUT Q OUTPUT Vcc 50% 20% Test Circuit Solder Profile Temperature 225°C Ramp-Up Rate 3°C/second max. from 150°C to 225°C. 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C 100°C N/C 25°C E/D 0 Time 60-120s Max. Vcc = Vcc2 = 3.3Vdc 10-30s 60-150s Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Ec204 PAGE 2 OF 2 REV: 01 DATE: 04/11/07 aCopyright 2001 Connor-Winfield all rights reserved.