The VTX-5786K family of pulsed-coupled cavity TWTs covers 8.4 GHz to 9.95 GHz the 5786K has 15 kW peak output power, 6.0 % duty cycle. This device has a non-intercepting grid pulsed and dual stage depressed collector to achieve 41 dB gain. Custom configurations are also available. These variations in the performance and configuration include: cooling method (affects average power level), mechanical configuration, electrical and RF connections, & single stage depressed collector Features Typical Operating Parameters • • • • • • • • • PARAMETER Cathode Voltage Cathode Current Heater Voltage Heater Current Collector #1 Voltage Collector #2 Voltage Grid Bias Voltage Grid Pulse Voltage RF Drive Power Pulse Width Duty Cycle Cooling Flow Rate Pressure Drop Weight Dimensions 8.4 GHz to 9.0 GHz 15 kW PEAK OUTPUT POWER 6.0 % DUTY CYCLE NON-INTERCEPTING GRID PULSED 41 dB GAIN DUAL STAGE DEPRESSED COLLECTOR FORCED LIQUID COOLED PPM FOCUSED COAXIAL INPUT, WR 90 WAVEGUIDE OUTPUT MIN -25 --8 --11 7 -300 200 ----3.5 ------- MAX -22 4.0 10 4 13 9 -400 350 1.0 100 6.0 --25 22 5x5x20 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp UNITS kV a V A kV kV V v W µsec % gpm psi lbs inches