The VTX-5783G pulsed-coupled cavity TWT covers 9.35GHz to 10.1GHz with 50 kW peak output power, 1.0 % duty cycle. This device has a non-intercepting grid pulsed and dual stage depressed collector to achieve 49 dB gain. Custom configurations are also available. These variations in the performance and configuration include: cooling method (affects average power level), mechanical configuration, electrical and RF connections, & single stage depressed collector Features Typical Operating Parameters • • • • • • • • • PARAMETER Cathode Voltage Cathode Current Heater Voltage Heater Current Collector #1 Voltage Collector #2 Voltage Grid Bias Voltage Grid Pulse Voltage RF Drive Power Pulse Width Duty Cycle Cooling Flow Rate Pressure Drop Weight Dimensions 9.35 GHz to 10.1 GHz 50 kW PEAK OUTPUT POWER 1.0 % DUTY CYCLE NON-INTERCEPTING GRID PULSED 49 dB GAIN DUAL STAGE DEPRESSED COLLECTOR FORCED AIR COOLED PPM FOCUSED WR 90 WAVEGUIDE INPUT AND OUTPUT MIN -34 --9 --18 13 -550 300 ----4.0 ------- MAX -31 8.5 11 6 20 15 -450 450 0.5 50 1.0 --3.0 19 5x5x18 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp UNITS kV a V A kV kV V v W µsec % lbm/mn In H2O lbs inches