CPI VTM-6292M4

250 W, CW Helix TWT Series, 8.0 GHz to 18.0 GHz, Periodic-Permanent, Magnet
Focused, Coaxial Input, Waveguide Output, and Conduction Cooled.
Custom configurations are also available. These variations in the performance and
configuration include: mechanical configuration, electrical and RF connections, & dual
stage depressed collector.
Model Number
Frequency
(GHz)
VTM-6292M4
8.0 – 18.0
Power Output
(Min.)
250 W
Operating Parameters
Features
•
•
•
•
•
•
•
•
250 Watts
8.0 GHz – 18.0 GHz
PPM Focusing
Coaxial Input
Waveguide Output
Any Mounting Position
Weight: 9 lbs. Max
Conduction Cooled
Heater
Voltage
Parameters:
Units:
Maximum:
Minimum:
Parameters:
Units:
Maximum:
Minimum:
Heater
Surge
Current
Helix
Voltage
Collector
Voltage 1
Collector
Voltage 2
Cathode
Current
Ef
If
Ew
Eb 1
Eb 2
Ik
Vdc
6.6
6.0
Adc
5.0
---
Vdc
10,400
9,900
Vdc
5,670
5,000
Vdc
3,570
3,000
mAdc
300
---
Helix
Current
Iw
mAdc
20
---
Drive
Power
Pd
mW
200
---
Cathode
Warm-up
Time
tk
minutes
--3
Load
----3:1
---
Collector
Thermostat
Temperature
T Base
°C
130
---
The values listed above represent specified limits for the product and are subject to change. The data should be used
for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design.
For additional information on CPI MPP products contact:
CPI MPP, Helix TWT Operation - 811 Hansen Way, Palo Alto, CA 94303-0750
Phone: 650-846-3900, Fax: 650-494-8779, Email: [email protected], www.cpii.com/mpp