200 W, CW Helix TWT Series, 1.0 GHz to 2.0 GHz, Periodic-Permanent, Magnet Focused, Coaxial Input and Coaxial Output, and Conduction Cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, & dual stage depressed collector. PI Model Number Frequency (GHz) VTL-6242F1 1.0 – 2.0 200 Watts 1.0 GHz – 2.0 GHz PPM Focusing Coaxial Input Coaxial Output Any Mounting Position Weight: 20 lbs. Max Conduction Cooled 200 W Operating Parameters Features • • • • • • • • Power Output (Min.) Heater Voltage Parameters: Units: Maximum: Minimum: Heater Surge Current Collector Voltage Cathode Current Helix Voltage Helix Current Ef If Eb Ik Ew Iw V 6.6 6.0 A 5.0 --- Vdc 3900 3100 mAdc 525 --- Vdc 3900 3100 mAdc 65 --- Parameters: Drive Power Pd Cathode Warm-up Time tk Units: Maximum: Minimum: mW 500 --- minutes --3 Load VSWR 2.0 --- The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Helix TWT Operation - 811 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3900, Fax: 650-494-8779, Email: [email protected], www.cpii.com/mpp