rev. page page 1 of 4 date date 02/2009 DESCRIPTION: switching power supply PART NUMBER: VGS-25-XX features ·green design, no-load power consumption <0.5 W ·universal ac input / full range ·short circuit, overload, over-voltage, brown-out (low ac input voltage) protected ·cooling by free air convection ·LED indicator for power on ·105°C long life electrolytic capacitors ·high operating temperature up to 70°C ·able to withstand 5G vibration ·high efficiency, long life, high reliability ·3 year warranty E210311 MODEL input voltage range range (V dc) (V ac) VGS-25-3.3 VGS-25-5 VGS-25-12 VGS-25-15 VGS-25-24 VGS-25-48 125~373 125~373 125~373 125~373 125~373 125~373 88~264 88~264 88~264 88~264 88~264 88~264 output voltage (V dc) output current range (A) dc output power (W) ripple & noise max. 2 (mV) efficiency typ. (%) 3.3 5 12 15 24 48 0~6 0~5 0~2.1 0~1.7 0~1.1 0~0.57 19.8 25 25.2 25.5 26.4 27.36 100 100 120 120 120 200 74 83 85 86 87 88 INPUT parameter input voltage range conditions/description input current at 115 V ac at 230 V ac at 230 V ac, cold start inrush current notes: min 125 88 nom max 373 264 0.7 0.35 30 units V dc V ac A A A 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-todate product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty. 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 PART NUMBER: VGS-25-XX page 2 of 4 date 02/2009 DESCRIPTION: switching power supply OUTPUT parameter voltage tolerance conditions/description 3.3 V 5 V 12 V, 15 V, 24 V, 48 V voltage adjust range ripple & noise (20MHz BW) setup rise hold time temperature coefficient short circuit protection line regulation 3 load regulation 4 over voltage protection over current protection min -3 -2 -1 -10 nom max units +3 % +2 % +1 % +10 % 3.3 V, 5 V 100 mV RMS 12 V, 15 V, 24 V 120 mV RMS 48 V 200 mV RMS setup: 800 ms, rise: 50 ms / 230 V ac setup: 1000 ms, rise: 65 ms / 115 V ac hold: >32 ms / 230 V ac, >10 ms / 115 V ac at 0~50°C ±0.03 %/°C continuous -0.5 +0.5 % ±2 % latch-off mode 115 150 % hiccup mode, auto recovery 110 % min 3000 (4242) 1500 (2121) 500 (707) 100 nom max units V ac (V dc) V ac (V dc) V ac (V dc) MΩ min nom -40 -25 20 10~500 Hz, 5 G, 10 minutes, 1 cycle (1 hour each axis) max 85 70 90 units °C °C % ISOLATION SPECIFICATIONS parameter isolation voltage conditions/description input/output, for 1 minute input/case, for 1 minute output/case, for 1 minute isolation resistance ENVIRONMENTAL parameter storage temperature operating temperature operating humidity vibration conditions/description SAFETY & EMI parameter safety approvals EMI standard EMC conditions/description min nom max UL60950-1, TUV EN60950-1 approved EN55022: 1998+A1: 2000+A2: 2003 class B EN61000-3-2: 2000+A2: 2005 class A, EN61000-3-3: 1995+A1: 2001, EN61204-3: 2000, EN50204: 1998+A1: 2001+A2: 2003 light industry level, criteria A yes at 240 V ac 2 RoHS compliant leakage current RELIABILITY mean time before failure (MTBF) 620,300 hours compliance standard: MIL-HDBK-217F GENERAL SPECIFICATIONS dimensions packaging notes: 79 x 51 x 28 mm 0.18 kg; 60 pcs / 13 kg 3. measured from high line to low line at full load 4. measured from full load to zero to 100% load at nominal input 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 units mA PART NUMBER: VGS-25-XX page 3 of 4 date 02/2009 DESCRIPTION: switching power supply DE-RATING CURVES 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2382 REV. A DESCRIPTION NEW DRAWING DATE 1/22/2009 78.50 3.091 L N GND 51.00 2.008 -V +V 12.00 0.472 M3 (2 PLCS) 28.25 1.112 14.00 0.551 66.50 2.618 12.00 0.472 2.50 0.098 53.50 2.106 NOTE: TERMINAL BLOCK SCREWS #6-32 (5 PLCS) RoHS TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED 26.00 1.024 7.62 (4 PLCS) 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com M3 (2 PLCS) 6.72 (5 PLCS) TITLE: SWITCHING POWER SUPPLY PART NO. PC FILE NAME: VGS-25-XX COPYRIGHT 2009 BY CUI INC. ZRJ A UNITS: VGS-25-XX DRAWN BY: REV: MM [INCHES] APPROVED BY: SCALE: 1:1 REV. A DIN RAIL MOUNTING OPTIONS DESCRIPTION NEW DRAWING DATE 6/22/2009 1 4 VGS-DR1 4 2 1 6 VGS-DR2 6 3 3 VGS-DR3 4 5 2 5 VGS-25 2 5 M3X6 SCREW (2 PCS) RoHS TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED 6 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com M4X6 SCREW (2 PCS) TITLE: VGS-25 DIN RAIL ACCESSORIES PART NO. PC FILE NAME: VGS-25-DIN-RAIL COPYRIGHT 2009 BY CUI INC. ZRJ A UNITS: VGS-25-DIN-RAIL DRAWN BY: REV: MM [INCHES] APPROVED BY: SCALE: 1:5