CURRENT 3.0 Amperes VOLTAGE 50 to 1000 Volts S3A THRU S3M Features · For surface mounted applications · Glass passivated junction · Low profile package · Built-in strain relief, ideal for automated placement · Plastic package has Unerwrites Laboratory Flammability Classification 94V-0 · High temperature soldering guaranteed: 250℃/10 seconds, at terminals DO-214AB (SMC) 0.245(6.22) 0.220(5.59) 0.124(3.15) 0.108(2.75) 0.280(7.11) 0.260(6.60) 0.012(0.31) 0.006(0.15) Mechanical Data 0.103(2.62) 0.079(2.00) · Case : JEDEC SMC(DO-214AB) molded plastic body · Terminals : Plated axial lead solderable per MIL-STD-750, method 2026 · Polarity : Color band denotes cathode end · Mounting Position : Any · Weight : 0.007 ounce, 0.25 gram 0.008(0.203) MAX. 0.050(1.27) 0.030(0.76) 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols S3A S3B S3D S3G S3J S3K S3M Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TL=75℃ (Note 2) I(AV) 3.0 Amps Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) TL=75℃ IFSM 100.0 Amps Maximum instantaneous forward voltage at 1.0A VF 1.15 Volts Maximum reverse current at rated voltage TA=25℃ TA=125℃ IR 1.0 250 μA Typical thermal resistance (Note 2) RθJL RθJA 13.0 47.0 ℃/W Typical reverse capacitance (Note 3) trr 2.5 μS Typical junction capacitance (Note 1) CJ TJ TSTG 60.0 pF Operating and storage temperature range -55 to +175 Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V dc. (2) Thermal resistance from junction to ambient and from junction to lead mounted on 0.2×0.2"(0.5×0.5mm) copper opad areas. (3) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A ℃ RATINGS AND CHARACTERISTIC CURVES S3A THRU S3M FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.1-FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT AMPERES 3.0 2.5 2.0 1.5 RESISTIVE OR INDUCTIVE LOAD P.C.B.MOUNTED ON 0.3X0.3"(8.0X8.0MM) COPPER PAD AREAS 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 INSTANTANEOUS FORWARD CURRENT (AMPERES) 100 3.5 LEAD TEMPERATURE (℃) 10 1 TJ=25℃ PULSE WIDTH=300mS 1% DUTY CYCLE 0.1 0.01 0.6 1.0 1.2 1.3 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 INSTANTANEOUS REVERSE CURRENT (mA) 0.8 TJ=125℃ 200 PEAK FORWARD SURGE CURRENT (AMPERES) 10 1.0 TJ=25℃ 0.1 0 20 40 60 80 100 100 TL=25℃ 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 10 1 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 100 NUMBER OF CYCLES AT 60Hz FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE FIG.5-TYPICAL JUNCTION CAPACITANCE TRANSIENT THERMAL IMPEDANCE (℃/W) 100 JUNCTION CAPACITANCE (pF) 100 TJ=25℃ f=1.0MHz Vsig=50mVp-p 10 1 10 REVERSE VOLTAGE. VOLTS 100 10 1 0.1 0.01 0.1 1 10 t,PULSE DURATION,sec 100