P300A THRU P300M GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes FEATURES DO-201AD ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High surge current capability ♦ Typical IR less than 0.1µA ♦ Construction utilizes void-free molded plastic technique ♦ 3.0 Ampere operation at TA=90°C with no thermal runaway ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) MECHANICAL DATA 0.052 (1.32) 0.048 (1.22) DIA. Case: JEDEC DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.4 ounce, 1.1 grams 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. P300B P300D P300G P300J P300K P300M UNITS Maximum repetitive peak reverse voltage SYMBOLS P300A VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at T A=55°C I(AV) 3.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200.0 Amps Maximum instantaneous forward voltage at 3.0A VF 1.2 Volts Maximum DC reverse current at rated DC blocking voltage IR 5.0 25.0 µA Typical junction capacitance (NOTE 1) CJ 30.0 pF Typical reverse recovery time (NOTE 2) trr 2.0 µs RΘJA RΘJL 20.0 5.0 °C/W TJ, TSTG -50 to +150 °C TA=25°C TA=100°C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted with 0.8” x 0.8” (20 x 20mm) copper heatsinks 4/98 FIG. 1 - FORWARD CURRENT DERATING CURVE 3.0 FIG. 2 - MAXIMUM PEAK FORWARD SURGE CURRENT 200 L=0.375 (9.5mm) LEAD LENGTH PEAK FORWARD CURRENT, AMPERES 0.8 x 0.8 x 0.40” (20 x 20 x 1mm) COPPER HEAT SINKS 1.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 0 20 50 100 150 TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) NON-REPETITIVE 2.0 100 REPETITIVE 180 AMBIENT TEMPERATURE, °C 10 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 100 10 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 1 0.1 10 TJ=150°C 1 TJ=100°C 0.1 TJ=25°C 0.01 0.4 0.01 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD VOLTAGE, VOLTS TRANSIENT THERMAL IMPEDANCE, °C/W FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE FIG. 5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF AVERAGE FORWARD RECTIFIED CURRENT, AMPERES RATINGS AND CHARACTERISTIC CURVES P300A THRU P300M TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 0.1 1 10 REVERSE VOLTAGE, VOLTS 100 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec. 10 100