MUR120 1.0A SUPER-FAST RECTIFIER ADVANCE INFORMATION Features · · · · · · Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 35A Peak Ideally Suited for Automated Assembly Plastic Material: UL Flammability Classification Rating 94V-0 B A A C D Mechanical Data · · · · · · DO-41 Plastic Case: Molded Plastic Terminals: Solder Plated Terminal Solderable per MIL-STD-202, Method 208 Marking: R120 Polarity: Cathode Band Weight: 0.35 grams (approx.) Mounting Position: Any Dim Min Max A 25.40 ¾ B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 All Dimensions in mm Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol MUR120 Unit VRRM VRWM VR 200 V VR(RMS) 141 V IO 1.0 A IFSM 35 A @ IF = 1.0A, TJ = 25°C @ IF = 1.0A, TJ = 150°C VFM 0.875 0.710 V @ TA = 25°C @ TA = 150°C IRM 2.0 50 mA Reverse Recovery Time (Note 2) trr 25 ns Forward Recovery Time (Note 3) tfr 25 ns Typical Junction Capacitance (Note 1) Cj 45 pF RqJA 72 K/W Tj, TSTG -65 to +175 °C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 130°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Ambient Operating and Storage Temperature Range Notes: 1. Measured at 1.0MHz and applied reverse voltage of 0V DC. 2. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. 3. Measured with IF = 1.0A, di/dt = 100A/ms, Duty Cycle £ 2.0%. DS30178 Rev. A-0 1 of 2 MUR120 10.0 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 7.0 2 1 5.0 0 50 25 75 100 125 150 0 TJ = 175 C 3.0 2.0 1000C 0 25 C 1.0 0.5 0.1 0.05 0 0.01 175 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 60 Single Half-Sine-Wave (JEDEC Method) 0 TJ = 175 C IR, REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) ADVANCE INFORMATION 3 50 40 30 20 10 1.0 0 TJ = 100 C 0.1 10 0.01 0 TJ = 25 C 0 1 10 100 0.001 0 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Reverse Characteristics trr 50Ω NI (Non-inductive) (-) 10Ω NI Device Under Test (+) +0.5A (-) 0A Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30178 Rev. A-0 2 of 2 MUR120