KBPC6005 THRU KBPC610 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere FEATURES ● ● KBPC6 Diffused Junction Surge overload rating: 125A peak .276(7.0) .236(6.0) .750 (19.0) MIN .042(1.07) DIA. .038(0.97) MECHANICAL DATA HOLE FOR NO.6 SCREW .620(15.7) .580(14.7) Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Terminals : Plated leads solderable per MIL-STD 202, method 208 ● Mounting Position: Any ● Marking: Type Number ● ● .445(11.3) .405(10.3) .620(15.7) .580(14.7) .445(11.3) .405(10.3) Polarity shown on side of case, Positive lead by beveled corner. Dim ensions in inches and (m ilim eters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C KBPC KBPC KBPC KBPC KBPC KBPC KBPC 6005 601 602 604 606 608 610 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 6.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 125 A Forward Voltage per leg VFM 1.1 V IR 5.0 500 µA I2t Rating for Fusing (t<8.3ms) (Note 2) I2t 64 A2s Typical Junction Capacitance (Note 3) Cj 80 pF 9.5 °C/W -65 to +125 °C Peak Reverse Current At Rated DC Blocking Voltage @IF = 3.0A @TA = 25°C @TA = 125°C Typical Thermal Resistance per leg (Note 1) Operating and Storage Temperature Range R JC Tj, TSTG Note: 1. Mounted on metal chassis. 2. Non-repetitive, for t > 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. KBPC6005 THRU KBPC610 10 Resistive or Inductive Load 8 6 Mounted on Metal Chassis 4 Mounted on PC Board 2 0 0 50 100 IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED OUTPUT CURRENT (A) RATINGS AND CHARACTERISTIC CURVES 100 10 1.0 0.1 0.01 0.6 150 IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 10 125 8.3ms Single half-sine-wave TJ = 125°C 100 Tj = 100°C 1.0 75 50 0.1 25 Tj = 25°C 0.01 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 100 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics