KBL6005 THRU KBL607 SINGLE PHASE SILICON BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere FEATURES ● ● ● ● KBL / RS Ideal for printed circuit board Surge overload rating: 150A peak High case dielectric strength High temperature soldering guaranteed: 260°C/10 seconds at 5lbs. (2.3kg) tension .76 8(19 .5) .728(18.5) .587(14.9) .5 47(13 .9) MECHANICAL DATA .640(16.3) .600(15.2) .750 M IN. (19.0) .052(1.3)DI A. .048(1.2)T YP. Case: UL-94 Class V-0 recognized Flame Retardant Epoxy ● Terminals : Plated leads solderable per MIL-STD 202, method 208 ● Mounting Position: Any ● Marking: Type Number ● . 220(5.6) .180(4.6) . 087(2.2) .071(1.8) .256(6.5) .236(6.0) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Symbol KBL 6005 KBL 601 KBL 602 KBL 604 KBL 605 KBL 606 KBL 607 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V @TC = 50°C IO 6.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage (per element) @IF = 3.0A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TC = 25°C @TC = 100°C IR 10 1.0 µA mA I2t 166 A2s 2.4 °C /W -65 to +150 °C Rating for Fusing (t < 8.3ms) (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range R JC Tj, TSTG Note: 1. Non-repetitive for t > 1ms and < 8.3ms. 2. Thermal resistance junction to case per element mounted on PC board with 13.0x13.0x0.03mm thick land areas. KBL6005 THRU KBL607 RATINGS AND CHARACTERISTIC CURVES FIG.1-DERATING CURVE OUTPUT RECTIFIED CURRENT FLG.1-MAXIMUM FORWARD SUNRGE CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES PEAK FORWARD SURGE CURRENT AMPERES 6.0 150 125 T J=25°C 1 10 5.0 4.0 3.0 2.0 1.0 50 0 100 NUMBER OF CYCLETS AT 60Hz 100 150 AMBIENT TEMPERATURE °C FIG.4– TYPICAL REVERSE CHARACTERISTICS FIG.4-TYPICAL FORWARD CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT MICROAMPERES INSTANTANEOUS FORWARD CURRENT,(A) 10 1.0 0.1 T J=25°C PULSE WIDTH:300us 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE,VOLTS 1.0 T J = 25! 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE