Embedded Power for Business-Critical Continuity Rev. 04.16.08 AD7216N2L 1 of 2 AD7216N2L RoHS 72 Watts Total Power: Input Voltage: # of Outputs: 72 Watts 90 - 264 Vac Single Electrical Specifications Input Special Features • Class II • Universal AC input • Fully regulated output • Overvoltage and short circuit protection • Constant voltage • High efficiency • IEC320 AC receptacle, 2 pin (type C8) • Built in EMI filter • (CISPR 22 Class B) • AC Input fuse • Complies with Blue Angel requirement Input range: Frequency: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90-264 Vac (wide range) 47-63 Hz 2 A maximum 85% typical FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 0.5 mA maximum@ 50/60 Hz, 264 Vac input Output Maximum Power (Po): Hold-up time: 72 W 10 ms. minimum at full load @ 120 Vac Short current protection: Auto recover Thermal protection: Internally protected; output will latch off Cable/connector: Overvoltage protection: DC cable length 2.1 mm center plug, right angle DC plug center +v DC plug outer -v 20 - 23 V; Lataching type, recycle ac to reset Environmental Specifications Safety UL: CuL: PSE: CB: UL 60950-1 60950-1 Denan Certificate and report Operating temperature: +5° to +40°C ambient Storage temperature: Electromagnetic susceptibility: -10°C to +70°C Designed to meet EN61000-4-2, -4, level 2; EN61000-4-5, Level 3 Humidity: Operating; non-condensing 5% to 90% RH Embedded Power for Business-Critical Continuity Ordering Information Model Number AD7216N2L Maximum Power 72 W Americas Output Voltage 16 V Maximum Load 4.5 A Peak Load Regulation 4.75 A ±5% 1 Ripple P/P (PARD)3 <250mV 2 1. Peak current lasting <4 seconds with a maximum 10% duty cycle. 2. At 25ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20MHz bandwidth and 10μF (tantalum capacitor) in parallel with a 0.1μF capacitor at rated line voltage and load ranges. Mechanical Drawing 4.54” (115.4) 72.83” (1850) Rev. 04.16.08 AD7216N2L 2 of 2 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: 1.10” (28.0) www.powerconversion.com technicalsupport@ powerconversion.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. (12.8) ±0.1 ±0.5 ?5.5 Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity 2.0” (51.0) DC Power Embedded Computing Embedded Power Monitoring NOTES: 1. DC PLUG OUTER DIAMETER = 5.5±0.1mm 2. DC PLUG INNER DIAMETER = 2.1±0.15mm 3. DC PLUG LENGTH = 12.8±0.5mm 4. OUTPUT CABLE LENGTH = 1850 +50/-30mm 1.10" (H) x 2.0" (W) x 4.54" (L) 28.0 mm (H) x 51 mm (W) x 115.4 mm (L) AC Input Connector: IEC320, C8 AC Input power cord sold separately Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Notes: Services 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02" (±0.5 mm) 3. Warranty: 2 year 4. Weight: 0.65 lb./ 0.29 kg 5. AC input power cord sold separately. 6. Specifications at factory settings at 115VAC input, 25 °C unless otherwise stated Surge Protection EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co.