Embedded Power for Business-Critical Continuity Rev. 1.23.06 DA4 Series 1 of 3 DA4 Series 4 Watts DA4-050EU Total Power: Input Voltage: # of Outputs: 4 Watts 90-264 VAC Single DA4-050US DA4-050CH Electrical Specifications Special Features • Switching wallmount power supply • Available in multiple AC plug configurations • CE Mark EMC & LVD • Universal AC input • Regulated output • Overload and short circuit protection • Constant voltage, constant current • High MTBF • Built in EMI filter (CISPR 22 Class B) • LED power good indicator Input Input range 90-264 VAC (wide range) Frequency EMI/RFI 47-63 Hz FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B &EMC89/336/EEC Safety ground leakage current 100 μA @ 50/60 Hz, 230 VAC input Output Voltage (Vo) 5.5V (5.0V - 6.0V) Maximum Power (Po) Hold-up time Overvoltage protection 4W Overload protection Output cable/ connector barrel polarity Reverse polarity -0001 suffix 15 ms. typical at full load @ 115 VAC 25% above nominal output maximum Latching type Output short circuit protection auto recover Overload protected > 800mA DC cable with 2.5 mm x 5.5 mm barrel plug DC plug center +V; DC plug outer -V DC plug center -V; DC plug outer +V Environmental Specifications Operating temperature: Safety UL CSA TUV NEMKO CB CE CCC 60950 / 6500 60950 60950 60950 Certificate and report EMC & LVD Mark 0° to 50°C ambient -40°C to +85°C Storage temperature: Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 Embedded Power for Business-Critical Continuity Rev. 1.23.06 DA4 Series 2 of 3 Ordering Information Ripple Model Number Maximum Power Output Voltage Minimum Load Maximum Load Peak Load P/P (PARD)1 DA4-050US 4W 5.5V 0 0.75A 0.80A 150mV DA4-050EU 4W 5.5V 0 0.75A 0.80A 150mV DA4-050CH 4W 5.5V 0 0.75A 0.80A 150mV 1. Peak-to-peak with 1 MHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges. 2. Output should not be crounded for EMI purpose. 3. Add -0001 suffix to the part number for reverse polarity, for example DA4-050US-0001. Mechanical Drawing DA4-050US CASE TOP 1.80" (45 8) 1.57" (39.8) 78.7" (2000.0) CASE BOTTOM 1.02" (26.0) 2.36" (60.0) DA4-050EU CASE TOP 2.36" (60.0) 2.23" (58.3) 1.57" (39.8) 78.7" (2000.0) 1.02" (26.0) CASE BOTTOM Embedded Power for Business-Critical Continuity Astec Power Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 DA4-050CH CASE TOP 2.36" (60.0) 1.80" (45.8) 1.57" (39.8) 78.7" (2000.0) Rev. 1.23.06 DA4 Series 3 of 3 1.02" (26.0) CASE BOTTOM Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Units 2111-2116, Level 21 Tower 1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: +852 2437 9662 Facsimile: +852 2402 4426 For global contact, visit: www.astecpower.com [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Notes: 1. Specifications subject to change without notice. Printed in U S A 2. all dimensions in inches (mm), tolerance is ±.02" 3. Warranty: 1 year 4. Weight: 0.325 lb. / 0.148 kg. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co.