Embedded Power for Business-Critical Continuity Rev. 06.15.07 LPT60-M Series 1 of 3 LPT60-M Series RoHS 60 Watts Medical Total Power: Input Voltage: # of Outputs: 60 - 80 Watts 85 - 264 VAC 120 - 300VDC Triple Electrical Specifications Special Features • • • • • • • • • • • Medical safety approvals Universal input 3" x 5" footprint Remote sense on main output Built-in EMI filter Low output ripple Adjustable 5V output Overvoltage protection Overload protection 110KHz switching frequency LPX60 enclosure kit available Input Input range Frequency Inrush current Input current Efficiency EMI Safety ground leakage current 85-264VAC 120-300VDC 47-440Hz <18A peak @ 115VAC; <36A peak @ 230VAC, cold start @ 25°C 1.5A max. (RMS) @ 115VAC 70% typical at full load FCC Class A conducted; CISPR 22 Class A conducted EN55022 Class A conducted; VDE 0878 PT3 Class A conducted <75μA max. @ 50/60 Hz, 264VAC input Output Maximum Power Cross regulation Adjustment range Hold-up time Overload protection Safety VDE UL CSA CE 0750/EN60601-1 (IEC601) 21310-3336-0015 UL2601 E182560 CSA 22.2 No. 601.1 LR109492 Mark (LVD) Overvoltage protection Remote sense 60W for convection; 80W with 30CFW forced air ±2% on output 1; ±5% on outputs 2, 3 -5, +10% minimum 20ms @ 60W load, 115VAC nominal line Short circuit protection on all outputs. Case overload protected @ 110% to 145% above peak rating 5.7 to 6.7 VDC on the main output Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Embedded Power for Business-Critical Continuity Rev. 06.15.07 LPT60-M Series 2 of 3 Environmental Specifications Operating temperature: Electromagnetic susceptibility: Humidity: 0° to 50°C ambient derate each output at 2.5% per degree from 50° to 70°C, -20°C startup Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 Operating; non-condensing 5% to 95% Vibration: Storage temperature: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5 Hz to 500 Hz, operational -40° to 85°C Temperature coefficient: ±.04% per °C MTBF demonstrated: >550,000 hours at full load and 25°C ambient conditions Ordering Information Maximum Load Maximum Load with Convnection with 30CFM cooling Forced Air LPT62-M +5V 0.7A 7A 8A +12V 0.3A 3A 3.5A -12V 0A 0.7A 1A LPT63-M +5V 0.7A 7A 8A +15V 0.3A 2.8A 3.3A -15V 0A 0.7A 1A 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. Model Number Output Voltage Minimum Load Peak Load1 10A 6A 1.5A 10A 4A 1.5A Regulation2 Ripple P/P (PARD)3 ±2% ±5% ±5% ±2% ±5% ±5% 50mV 120mV 120mV 50mV 150mV 150mV 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10μF in parallel with a 0.1μF capacitor at rated line voltage and load ranges. 4. Minimum Loads are required. Embedded Power for Business-Critical Continuity Mechanical Drawing Americas Rev. 06.15.07 LPT60-M Series 3 of 3 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.astecpower.com www.artesyn.com [email protected] [email protected] m Pin Assignments Connector LPT62-M LPT63-M SK1-1 SK1-3 Neutral Line Neutral Line SK2-1 SK2- 2 SK2- 3 SK2-4 SK2-5 SK2-6 SK201-1 SK201-2 +12V +5V +5V Common Common -12V +Sense -Sense +15V +5V +5V Common Common -15V +Sense -Sense Mating Connectors AC Input: DC Outputs: Molex 09-50-8031 (USA) 09-91-0300 (UK) PINS: 08-58-0111 Molex 09-50-8061 (USA) 09-91-0600 (UK) PINS: 08-52-0113 Remote Sense: Molex 22-01-2025 PINS: 08-52-0113 Astec Connector Kit #70-841-006, includes all of the above 1. 2. Specifications subject to change without notice. All dimensions in inches (mm), tolerance is ±0.02" (±0.5mm) 3. 4. 5. Mounting holes M1 and M2 should be grounded for EMI purposes. Mounting hole M1 is safety ground connection. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. 7. Warranty: 2 year Weight: 0.75lbs/0.34kg While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in US A Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.