LED - Lamp ELD-630-524 16.11.2007 rev. 05 Radiation Type Technology Case Red Standard AlInGaP/GaAs 5 mm plastic lens Description Reliable high-speed red LED in standard 5 mm package, with lens for optimal beam focusing, housing without standoff leads 9 - 0,5 6 - 0,3 1,1 - 0,1 2,54 5,3 - 0,3 0,8 - 0,4 Anode 2 - 1,0 Applications 0,6 - 0,2 32,5 Optical communications, safety equipment, automation, optical sensors Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 50 mA IFM 100 mA Operating temperature range Tamb -20 to +85 °C Storage temperature range Tstg -55 to +100 °C Junction temperature TJ 100 °C Typ Max Unit 2.1 2.5 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min VF Reverse voltage IR = 10 µA VF 5 Radiant power IF = 20 mA Φe 2 3 mW Luminous intensity IF = 20 mA Ιv 1350 1900 mcd Peak wavelength IF = 20 mA λp 620 630 Viewing angle IF = 20 mA ϕ 20 deg. Switching time IF = 20 mA tr, tf 20 ns V 640 nm *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545