LED - Lamp ELD-505-524 16.11.2007 rev. 02 Radiation Type Technology Case Cyan Standard InGaN/Al2O3 5 mm plastic lens Description 8,6 Ø5,9 ±0,2 Ø5,0 ±0,3 0,5 1 ±0,3 ±0,2 Note: Special packages with standoff available on request 2,54 Anode High-power, cyan LED in standard 5 mm package, high brightness and narrow beam angle, housing without standoff leads Applications 1,0 min Illumination, safety equipment, automation 25,4 min Absolute Maximum Ratings at Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 50 mA IFM 100 mA P 200 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -30 to +100 °C Tj 100 °C Tsd 260 °C Typ Max Unit 3.2 3.8 V DC forward current Peak forward current tp≤10 µs, f≤500 Hz Power dissipation Junction temperature t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test conditions Symbol Forward voltage IF = 20 mA VF Reverse voltage IR = 10 µA VR 5 Luminous intensity IF = 20 mA Ιv 4900 7000 Peak wavelength IF = 20 mA λp 500 505 Dominant wavelength IF = 20 mA λD 506 nm Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 30 nm Viewing angle IF = 20 mA ϕ 15 deg. Switching time IF = 20 mA tr, tf 40 ns Parameter Min V mcd 510 nm Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545