LED - Lamp ELD-880-535 15.11.2007 rev. 02 Radiation Type Technology Case Infrared DDH AlGaAs/AlGaAs 5 mm plastic lens Description High-power, high-speed LED, double heterostructure with removed substrate, housing without standoff leads 8,6 Ø5,9 ±0,2 Ø5,0 ±0,3 0,5 1 Note: Special packages with standoff available on request 2,54 Anode ±0,3 ±0,2 Applications 1,0 min 25,4 min Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 150 mA (tP ≤ 50 µs, tP /T = 1/2) IFM 200 mA IR=10 µA VR 5 V PD 280 mW Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C Typ Max Unit 1,6 2,0 V Forward current (DC) Peak forward current Reverse voltage Power dissipation Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 100 mA Forward voltage Symbol Min VF Radiant power IF = 100 mA Φe 30 45 mW Radiant intensity IF = 100 mA Ιe 60 90 mW/sr Peak wavelength IF = 100 mA λp 865 880 Spectral bandwidth at 50% IF = 100 mA ∆λ0.5 50 nm Viewing angle IF = 100 mA ϕ 30 deg. 10/20 ns tr, tf IF = 100 mA Switching time Note: All measurements carried out on EPIGAP equipment 895 nm We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545