LED - Lamp ELD-525-523 16.11.2007 rev. 02 Radiation Type Technology Case Green Standard InGaN/Al2O3 5 mm plastic lens Description Reliable high-speed green LED in standard 5 mm package, narrow beam angle, housing without standoff leads 8,6 Ø5,9 ±0,2 Ø5,0 ±0,3 0,5 1 Note: Special packages with standoff available on request 2,54 Anode ±0,3 ±0,2 Applications 1,0 min Optical communications, safety equipment, automation, optical sensors 25,4 min Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 20 mA IFM 100 mA PD 65 mW Operating temperature range Tamb -40 to +85 °C Storage temperature range Tstg -40 to +100 °C Junction temperature TJ 100 °C Typ Max Unit 3.4 4.0 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter* conditions IF = 20 mA Forward voltage Symbol Min VF Reverse voltage IR = 100 µA VF 5 Radiant power IF = 20 mA Φe 2.4 3.4 mW Radiant intensity IF = 20 mA Ιe 15 20 mW/sr Luminous intensity IF = 20 mA Ιv 4900 7000 mcd Peak wavelength IF = 20 mA λp 510 515 Dominant wavelength IF = 20 mA λD 525 nm Viewing angle IF = 20 mA ϕ 15 deg. Switching time IF = 20 mA tr, tf 15 ns V 520 nm *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-525-523 16.11.2007 rev. 02 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-525-523 16.11.2007 rev. 02 Remarks concerning optical radiation safety* Up maximum forward current and at continuous operation, this LED may be classified as LED product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin under reasonably predictable conditions. This implicates a direct observation of the light beam by means of optical instruments. *Note: Safety classification of an optical component mainly depends on the intended application and the way the component is being used. Furthermore, all statements made to classification are based on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed current or altering the light beam with additional optics may lead to different safety classifications. Therefore these remarks should be taken as recommendation and guideline only. LED Class 1 accord. DIN EN/IEC 60825-1:2001-11 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 3 of 3 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545