LED - Lamp ELD-572-524 16.11.2007 rev. 03 Radiation Type Technology Case Yellow-green Standard GaP/GaP 5 mm plastic lens Description 8,6 Ø5,9 ±0,2 Ø5,0 ±0,3 0,5 1 Note: Special packages with standoff available on request 2,54 Anode ±0,3 ±0,2 Yellow-green LED in standard 5 mm package, with lens for optimal beam focusing, housing without standoff leads Applications 1,0 min 25,4 min Illumination, safety equipment, automation, optical sensors Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 50 mA IFM 100 mA PD 128 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -30 to +100 °C Junction temperature TJ 80 °C Tsd 260 °C Typ Max Unit VF 2.2 2.7 V 2.4 3.0 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage* IF = 40 mA VF Reverse voltage IR = 10 µA VF 5 Radiant power IF = 20 mA Φe 0,12 0,17 mW Radiant intensity IF = 20 mA Ιe 0,55 0,70 mW/sr Luminous intensity IF = 20 mA Ιv 270 350 mcd Luminous intensity* IF = 40 mA Ιv 700 mcd Peak wavelength IF = 20 mA λp Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 30 nm Viewing angle IF = 20 mA ϕ 18 deg. Switching time IF = 20 mA tr, tf 560 V 572 580 ≤1 nm µs *measured after 30s current flow Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545 LED - Lamp ELD-572-524 16.11.2007 rev. 03 We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 2 of 2 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545