OP-07 OP-07 Low Offset, Low Drift Operational Amplifier Literature Number: SNOS556A OP-07 Low Offset, Low Drift Operational Amplifier General Description Features The OP-07 has very low input offset voltage which is obtained by trimming at the wafer stage. These low offset voltages generally eliminate any need for external nulling. The OP-07 also features low input bias current and high openloop gain. The low offsets and high open-loop gain make the OP-07 particularly useful for high-gain applications. The wide input voltage range of g 13V minimum combined with high CMRR of 110 dB and high input impedance provide high accuracy in the non-inverting circuit configuration. Excellent linearity and gain accuracy can be maintained even at high closed-loop gains. Stability of offsets and gain with time or variation in temperature is excellent. The OP-07 is available in TO-99 metal can, ceramic or molded DIP. For improved specifications, see the LM607. Y Y Y Y Y Y Y Y Low VOS 75 mV Max Low VOS Drift 0.6 mV/§ C Max Ultra-Stable vs Time 1.0 mV/Month Max Low Noise 0.6 mVp-p Max g 14V Wide Input Voltage Range g 3V to g 18V Wide Supply Voltage Range Fits 725/108A/308A, 741, AD510 Sockets Replaces the mA714 Applications Y Y et Y Strain Gauge Amplifiers Thermocouple Amplifiers Precision Reference Buffer Analog Computing Functions e Y Connection Diagram bs ol Dual-In-Line Package TL/H/10550 – 1 See NS Package Number N08E Ordering Information O TA e 25§ C VOSMax (mV) N08E Plastic Operating Temperature Range 75 OP07EP COM 150 OP07CP COM 150 OP07DP COM *Also available per SMD Ý8203602 C1995 National Semiconductor Corporation TL/H/10550 RRD-B30M115/Printed in U. S. A. OP-07 Low Offset, Low Drift Operational Amplifier December 1994 Absolute Maximum Ratings Storage Temperature Range If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage Junction Temperature g 22V Internal Power Dissipation (Note 5) Differential Input Voltage Input Voltage (Note 6) Output Short-Circuit Duration b 65§ C to a 150§ C Lead Temperature (Soldering, 60 sec.) 260§ C b 65§ C to a 150§ C Operating Temperature Range 500 mW g 30V g 22V Continuous OP-07E, OP-07C, OP-07D 0§ C to a 70§ C bs ol et e Simplified Schematic O *R2A and R2B are electronically trimmed on chip at the factory for minimum offset voltage. 2 TL/H/10550 – 3 Electrical Characteristics Unless otherwise specified, VS e g 15V, TA e 25§ C. Boldface type refers to limits over 0§ C s TA s 70§ C Symbol Parameter OP-07E Conditions Min VOS Input Offset Voltage (Note 1) VOS/t Long-Term VOS Stability (Note 2) IOS Input Offset Current IB Input Bias Current OP-07C Typ Max 30 45 Min Units Typ Max 75 130 60 85 150 250 mV 0.3 1.5 0.4 2.0 mV/Mo 0.5 0.9 3.8 5.3 0.8 1.6 6.0 8.0 nA g 1.2 g 4.0 g 1.8 g 7.0 g 1.5 g 5.5 g 2.2 g 9.0 nA Input Noise Voltage 0.1 Hz to 10 Hz (Note 3) 0.35 0.6 0.38 0.65 mVp-p en Input Noise Voltage Density fO e 10 Hz fO e 100 Hz (Note 3) fO e 1000 Hz 10.3 10.0 9.6 18.0 13.0 11.0 10.5 10.2 9.8 20.0 13.5 11.5 nV/0Hz inp-p Input Noise Current 0.1 Hz to 10 Hz (Note 3) in Input Noise Current Density fO e 10 Hz fO e 100 Hz (Note 3) fO e 1000 Hz RIN Input Resistance Differential-Mode (Note 4) RINCM Input Resistance Common-Mode IVR Input Voltage Range PSRR AVO VO SR 30 15 35 pAp-p 0.80 0.23 0.17 0.35 0.15 0.13 0.90 0.27 0.18 pA/0Hz et 14 0.32 0.14 0.12 15 50 8 160 Common-Mode Rejection Ratio VCM e g 13V Power Supply Rejection Ratio VS e g 3V to g 18V VS e g 3V to g 18V Large Signal Voltage Gain RL t 2 kX, VO e g 10V RL t 2 kX RL t 500X, VO e g 0.5V, VS e g 3V (Note 4) Output Voltage Swing RL t 10 kX RL t 2 kX RL t 2 kX RL t 1 kX 33 MX 120 GX g 13.0 g 14.0 g 13 g 14 V 106 103 123 123 100 97 120 120 dB bs ol CMRR e enp-p 5 7 20 32 7 10 200 180 500 450 120 100 400 400 150 400 100 400 g 12.5 g 13.0 g 12.0 g 13.0 g 12.0 g 12.8 g 11.5 g 12.8 g 12.0 g 12.6 g 11.0 g 12.6 g 10.5 g 12.0 32 51 mV/V V/mV V g 12.0 Slew Rate RL t 2 kX (Note 3) 0.1 0.3 0.1 0.3 V/ms Closed-Loop Bandwidth AVCL e a 1 (Note 3) 0.4 0.6 0.4 0.6 MHz RO Output Resistance VO e 0, IO e 0 60 Pd Power Consumption VS e g 15V, No Load VS e g 3V, No Load 75 4 O BW 60 120 6 80 4 X 150 8 Offset Adj. Range RP e 20 kX g4 Average Input Offset Voltage Drift Without External Trim With External Trim (Note 4) 0.3 1.3 0.5 1.8 RP e 20 kX (Note 4) 0.3 1.3 0.4 1.6 TCIOS Average Input Offset Current Drift (Note 3) 8 35 12 50 pA/§ C TCIB Average Input Bias Current Drift (Note 3) 13 35 18 50 pA/§ C TCVOS TCVOSn g4 mW mV mV/§ C 3 Electrical Characteristics Unless otherwise specified, VS e g 15V, TA e 25§ C. Boldface type refers to limits over 0§ C s TA s a 70§ C Symbol Parameter OP-07D Conditions Min Units Typ Max VOS Input Offset Voltage (Note 1) 60 85 150 250 mV VOS/t Long-Term VOS Stability (Note 2) 0.5 3.0 mV/Mo IOS Input Offset Current 0.8 1.6 6.0 8.0 nA IB Input Bias Current en 0.1 Hz to 10 Hz (Note 3) 0.38 0.65 mVp-p Input Noise Voltage Density fO e 10 Hz fO e 100 Hz (Note 3) fO e 1000 Hz 10.5 10.3 9.8 20.0 13.5 11.5 nV/0Hz 15 35 pAp-p Input Noise Current 0.1 Hz to 10 Hz (Note 3) in Input Noise Current Density fO e 10 Hz fO e 100 Hz (Note 3) fO e 1000 Hz RIN Input Resistance Differential-Mode (Note 4) RINCM Input Resistance Common-Mode IVR Input Voltage Range PSRR Power Supply Rejection Ratio VS e g 3V to g 18V Large Signal Voltage Gain RL s 2 kX, VO e g 10V RL e 2 kX, VO e g 10V RL t 500X, VO e g 0.5V, VS g 3V (Note 4) BW RO 31 MX GX g 13 g 14 V 94 94 110 106 dB 7 10 RL t 10 kX RL t 2 kX RL t 2 kX RL t 1 kX 120 100 32 51 400 400 mV/V V/mV 400 g 12.0 g 13.0 g 11.5 g 12.8 g 11.0 g 12.6 V g 12.0 Slew Rate RL t 2 kX (Note 3) 0.1 0.3 V/ms Closed-Loop Bandwidth AVCL e a 1 (Note 3) 0.4 0.6 MHz Output Resistance VO e 0, IO e 0 60 Power Consumption VS e g 15V, No Load VS e g 3V, No Load 80 4 O Pd pA/0Hz et Common-Mode Rejection Ratio Output Voltage Swing 0.90 0.27 0.18 120 bs ol CMRR SR 0.35 0.15 0.13 7 VCM e g 13V VO nA Input Noise Voltage inp-p AVO g 12.0 g 14.0 e enp-p g 2.0 g 3.0 X 150 8 mW Offset Adj. Range RP e 20 kX g4 (Note 4) 0.7 2.5 mV/§ C TCVOSn Average Input Offset Voltage Drift Without External Trim With External Trim RP e 20 kX (Note 4) 0.7 2.5 mV/§ C TCIOS Average Input Offset Current Drift (Note 3) 12 50 pA/§ C TCIB Average Input Bias Current Drift (Note 3) 18 50 pA/§ C TCVOS mV Note 1: VOS is measured approximately 0.5 second after application of power. Note 2: Long-Term Offset Voltage Stability refers to the averaged trend line of VOS vs Time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5 mV. Parameter is sample tested. Note 3: Sample Tested. Note 4: Guaranteed by design. 4 Test Circuits Offset Voltage Test Circuit Low Frequency Noise Test Circuit TL/H/10550 – 4 TL/H/10550 – 5 e Optional Offset Nulling Circuit O bs ol et TL/H/10550 – 6 5 e et Order Number OP-07EP, OP-07CP or OP-07DP NS Package Number N08E bs ol OP-07 Low Offset, Low Drift Operational Amplifier Physical Dimensions inches (millimeters) (Continued) LIFE SUPPORT POLICY O NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated