FERROXCUBE DATA SHEET RM6R RM, RM/I, RM/ILP cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6R CORE SETS Effective core parameters SYMBOL PARAMETER VALUE 14.7 0 −0.6 UNIT Σ(I/A) core factor (C1) 0.810 mm−1 Ve effective volume 810 mm3 Ie effective length 25.6 mm Ae effective area 32.0 mm2 Amin minimum area 23.8 mm2 m mass of set ≈ 4.5 g handbook, halfpage 7.4 0 2.9 −0.4 M1.7 17.9 0 −0.7 ∅6.4 0 −0.2 10.35 ±0.2 ∅3 +0.1 0 8 +0.4 12.4 0 ±0.1 2.3 CBW128 ∅12.4 +0.5 0 Dimensions in mm. Fig.1 RM6R core set. Core sets for filter applications Clamping force for AL measurements, 40 ±20 N. GRADE 3D3 3H3 AL (nH) TOTAL AIR GAP (µm) TYPE NUMBER (WITH NUT) TYPE NUMBER (WITHOUT NUT) 40 ±3% ≈ 26 ≈ 1200 RM6R-3D3-E40/N RM6R-3D3-E40 63 ±3% ≈ 41 ≈ 700 RM6R-3D3-E63/N RM6R-3D3-E63 100 ±3% ≈ 65 ≈ 400 RM6R-3D3-E100/N RM6R-3D3-E100 RM6R-3D3-A160/N RM6R-3D3-A160 − RM6R-3D3 160 ±3% ≈ 103 ≈ 200 1000 ±25% ≈ 650 ≈0 160 ±3% ≈ 103 ≈ 230 RM6R-3H3-A160/N RM6R-3H3-A160 250 ±3% ≈ 161 ≈ 110 RM6R-3H3-A250/N RM6R-3H3-A250 315 ±3% ≈ 203 ≈ 90 RM6R-3H3-A315/N RM6R-3H3-A315 400 ±3% ≈ 258 ≈ 70 RM6R-3H3-A400/N RM6R-3H3-A400 ≈ 1420 ≈0 − RM6R-3H3 2200 ±25% 2008 Sep 01 µe 1202 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6R INDUCTANCE ADJUSTER 0.07 O 3.13 0 handbook, halfpage General data PARAMETER SPECIFICATION Material of head and thread polypropylene (PP), glass fibre reinforced Maximum operating temperature 125 °C 9.5 3.4 M 1.7 2.4 min 0.7 MGC079 Dimensions in mm. Fig.2 RM6R inductance adjuster. Inductance adjuster selection chart GRADE 3H3 AL (nH) TYPES FOR LOW ADJUSTMENT 40 − 63 − ∆L/L(1) TYPES FOR MEDIUM ∆L/L(1) % ADJUSTMENT % − − − − ∆L/L(1) % ADJ-RM6-GREEN 20 22 ADJ-RM6-GREEN 14 ADJ-RM6-RED 10 ADJ-RM6-RED 16 − 160 ADJ-RM6-GREEN 6 ADJ-RM6-RED 10 ADJ-RM6-WHITE 19 − 8 ADJ-RM6-WHITE 15 ADJ-RM6-VIOLET 18 250 ADJ-RM6-WHITE 12 ADJ-RM6-VIOLET 14 ADJ-RM6-BROWN 20 315 ADJ-RM6-WHITE 9 ADJ-RM6-BROWN 15 ADJ-RM6-BLACK 22 400 ADJ-RM6-VIOLET 8 ADJ-RM6-BLACK 16 ADJ-RM6-GREY 30 630 ADJ-RM6-BLACK 9 ADJ-RM6-GREY 15 − − 1000 ADJ-RM6-BLACK 5 ADJ-RM6-GREY 8 − − 1250 − − ADJ-RM6-GREY 5 − − 40 − − − − ADJ-RM6-GREEN 20 63 − − ADJ-RM6-GREEN 14 ADJ-RM6-RED 23 9 ADJ-RM6-RED 16 ADJ-RM6-WHITE 28 ADJ-RM6-WHITE 17 − 100 ADJ-RM6-GREEN 160 ADJ-RM6-RED 10 Note 1. Maximum adjustment range. 2008 Sep 01 TYPES FOR HIGH ADJUSTMENT 100 ADJ-RM6-GREEN 200 ADJ-RM6-RED 3D3 (applies to all types) 1203 − Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6R COIL FORMERS General data PARAMETER SPECIFICATION Coil former material phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with “UL 94V-0”; UL file number E167521(M) Pin material copper-tin alloy (CuSn), tin (Sn) plated Maximum operating temperature 180 °C, “IEC 60085”, class H Resistance to soldering heat “IEC 60068-2-20”, Part 2, Test Tb, method 1B, 350 °C, 3.5 s Solderability ‘‘IEC 60068-2-20”, Part 2, Test Ta, method 1 0 7.8 0.15 12.7 handbook, full pagewidth 7.62 0 0.8 0.1 2.54 (6.4 min) 1.6 0.75 0.4 O 0.6 2 3 0 0 O 12.3 0.2 O 7.45 0.2 0.15 6.5 0 1 8.6 5.7 max 4 0.4 1.4 min 5.2 MGC080 1 0.15 0 Dimensions in mm. Fig.3 RM6R coil former; 4-pins. Winding data and area product for 4-pins RM6R coil former NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED AVERAGE LENGTH OF TURN (mm) WINDING AREA (mm2) WINDING WIDTH (mm) AREA PRODUCT Ae x Aw (mm 4) 1 4 all 30 15 6.4 480 CSV-RM6S/R-1S-4P 2 4 all 30 2 × 7.0 2 × 3.0 2 x 224 CSV-RM6S/R-2S-4P 2008 Sep 01 1204 TYPE NUMBER Ferroxcube RM, RM/I, RM/ILP cores and accessories 0 7.8 0.15 12.7 handbook, full pagewidth 7.62 RM6R 0 0.8 0.1 2.54 (6.4 min) 1.6 0.7 min 3 0.75 0.4 O 0.6 4 5 6.5 0.15 0 12.3 0 0 0.2 O 7.45 0.2 2 8.6 5.7 max 6 1 0.4 5.2 MGC081 1 0.15 0 Dimensions in mm. Fig.4 RM6R coil former; 6-pins. Winding data and area product for 6-pins RM6R coil former NUMBER OF SECTIONS NUMBER OF PINS PIN POSITIONS USED AVERAGE LENGTH OF TURN (mm) WINDING AREA (mm2) WINDING WIDTH (mm) AREA PRODUCT Ae x Aw (mm4) 1 6 all 30 15 6.4 480 CSV-RM6R-1S-6P 2 6 all 30 2 × 7.0 2 × 3.0 2 x 224 CSV-RM6R-2S-6P MOUNTING PARTS handbook, halfpage General data ITEM TYPE NUMBER 2.3 1.6 SPECIFICATION Clamping force ≈ 20 N Clip material steel Clip plating silver (Ag) Solderability “IEC 60 068-2-20”, Part 2, Test Ta, method 1 Type number CLI/P-RM6 12 4.5 0.7 MGC082 Dimensions in mm. Fig.5 Mounting clip for RM6R. 2008 Sep 01 1205 9.8 Ferroxcube RM, RM/I, RM/ILP cores and accessories RM6R DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1206