BYT42AGP THRU BYT42MGP SINTERED GLASS JUNCTION FAST SWITCHING PLASTIC RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.25A FEATURE DO-41\DO-204AL High temperature metallurgically bonded construction Sintered glass cavity free junction Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.1µA Fast Soft Recovery Rectifier MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =150°C Maximum Reverse Recovery Time (Note 1) Non repetitive reverse avalanche energy Typical Thermal Resistance I(BR)R=0.4A (Note 2) Storage and Operating Junction Temperature SYMBOL BYT42 AGP Vrrm Vrms Vdc 50 35 50 BYT42 BGP BYT42 DGP BYT42 GGP BYT42 JGP BYT42 KGP BYT42 MGP 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 units V V V If(av) 1.25 A Ifsm 30.0 A Vf 1.4 V Ir 5.0 150.0 µA µA Trr ER R(ja) Tstg, Tj 150 200 10.0 55.0 -65 to +175 nS mJ °C /W °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES BYT42AGP THRU BYT42MGP 1 1 Rev.A1 www.gulfsemi.com