RGPP3A THRU RGPP3M GLASS PASSIVATED FAST RECOVERY RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURE DO - 201AD Molded case feature for auto insertion High Switching Capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL RGPP 3A RGPP 3B RGPP 3D RGPP 3G RGPP 3J RGPP 3K RGPP 3M units Maximum Recurrent Peak Reverse Voltage Vrrm Vrms Maximum DC blocking Voltage Vdc 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V Maximum RMS Voltage 50 35 50 Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C If(av) 3.0 A Ifsm 125 A Vf 1.3 V Ir(av) 30 µA 5.0 100.0 50.0 µA µA Maximum DC Reverse Current at rated DC blocking voltage Typical Junction Capacitance Ta =25°C TL =55°C Ir (Note 1) Cj Maximum Reverse Recovery Time (Note 2) Storage and Operation Junction Temperature Trr Tstg, Tj 150 V pF 250 -55 to +150 V 500 nS °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RGPP3A THRU RGPP3M 1 1 Rev.4 www.gulfsemi.com