H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME DUAL OUTPUT 180 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP180 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES OR-ING DIODES FOR PARALLEL OPERATION MEET IEC1000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: AMP 643495-2 connector or Molex 5273-5A. Input Frequency: 47-63Hz. Inrush Current: Typ. 30A @ 230Vac. Input Current: Typ. 2.4A@115Vac, 1.2A @230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB. 22 Class B. Hold-up Time: Typ. 30mS @115Vac & 230Vac. Power OK Signal: Installed. Power Factor Correction: Meet Harmonic Correction per IEC1000-3-2 PF typ. 0.97-0.98. Over Temperature Protection: By thermostat. Earth Leakage: Typ. 0.5 mA @230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: AMP 640445-0 & 640456-2 or Molex 5273-10A & 6410-2A. Output Wattage: Typ. 180 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main O/P VO1 ±1% typ. Aux. O/P VO2 ±5% typ. (Common choke & stacked on VO1.) Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in at main O/P VO1 only. Remote Sensing: Available at VO1. OR-ing diodes: Installed in each output. Adjustability: Available at VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 73-76%. Switching Frequency: Fixed frequency at 65K Hz. Circuit Topology: PWM fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Safety Standard: UL1950/EN60950 Class I. Operating Temperature: 0 to +50ºC. Storage Temperature: -20 to +85ºC. Temperature Coefficient: 0.04%/ºC. Cooling: Recommended 30 cfm fan cooling for full load. Construction: U-bracket format. Power Density: 3.43 Watts / Cubic Inch. In application -59- OUTPUT VOLTAGE / CURRENT RATINGS CHART DUAL OUTPUT MODEL NO. HVP180-21 MAIN VO1 @★#⊙ Typ. Volt. 25.0A +5.0V AUX. VO2 ■⊙† Typ. Volt. 5.0A +12.0V HVP180-22 25.0A +5.0V 4.0A +15.0V HVP180-23 25.0A +5.0V 3.0A +24.0V HVP180-290 25.0A +3.3V 10.0A +5.0V HVP180-291 25.0A +3.3V 5.0A +12.0V HVP180-292 25.0A +3.3V 4.0A +15.0V HVP180-293 25.0A +3.3V 3.0A +24.0V Symbol: "★" OVP built-in. "@" Adjustable. "†" Stacked on main O/P. "■" Couple Filter Choke. "⊙" With Or-ing diode. "#" Remote sensing. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 940.0g (33.1 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT DUAL OUTPUT ASSIGNMENT AC-L AC-N AC-G VO1 VO2 DC-COM PFS CNTR & PIN # P1-5. P1-3. P1-1. P2-11,12,13,14,15 P2-2 P2-3,4,5,6,7,8 P2-1 Mating connecter: P1: AMP 640426-5 or Molex 5239-5A. P2: AMP 640427-0 or Molex 5239-10A, 5195-10A. P3 & P4: AMP 640440-2 or Molex 2695-2A. -60- +VO1 # P2-9 ASSORTED SIGNALS -VO1 # FAN (-) P2-10 P3-1,P4-1 FAN (+) P3-2,P4-2