H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION AC-DC N+1 REDUNDANCY AND ACTIVE CURRENT SHARING ENCLOSURE PLUG-IN BOX TRIPLE OUTPUT 500 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP500 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES DUAL CONVERTER ARCHITECTURE MEET IEC 61000-3-2 HARMONIC CORRECTION HOT-SWAPPABLE/OR-ING DIODES FOR N+1 REDUNDANCY MEET UNIVERSAL SAFETY STANDARDS EMI MEET EN 55022 CLASS A CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264 Vac with PFC. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex Mini-Fit 5569-24. Output Wattage: 500 watts max. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±2.0%. Main VO2 typ. ±2.0%. Aux. VO3 typ. ± 2.5% (Magnetic Amp). Noise & Ripple: Typ. 1-2.0% peak to peak. OVP: Built-in at all outputs (Latch). Over Current Protection: Installed in all outputs. Redundancy: All three O/P available for N+1 redundancy operation. Current Sharing: 3rd-wire current sharing for VO1,2. OR-ing Diode: Installed in VO1,2,3. Adjustability: Available at VO1,2,3. Remote Sense: Available at VO1 & VO2. Overload Protection (OLP): Fully protected against output overload or short circuit. Consult the factory for OLP setting. Input Connector: IEC320-3P with On/Off Switch. Input Frequency: 47-63Hz. Inrush Current: Typ. 24.0A@230Vac (Active). Input Current: Typ. 7.0A@115Vac/ 3.5A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet EN 55022 Class A. Hold-up Time: Typ. 28mS @ 115Vac & 230Vac. Power OK Signal: Available at VO1, VO2 & VO3. Power Factor Correction: Meet Harmonic Correction IEC 61000-3-2. PF typ. 0.97-0.98. Over Temperature Protection: By thermostat. Power-On LED Indicator: Installed. Earth Leakage: Less than 0.78mA@230Vac. GENERAL SPECIFICATION Efficiency: Typ. 65-70%. Switching Frequency: Fixed frequency at 60K Hz. Circuit Topology: PWM fixed-frequency forward circuit. Transient Response: Output voltage returns in typ. 0.3mS following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Hot Swappable: Available. Power Density: 2.72 Watts/ Cubic Inch. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Cooling fan installed inside. MTBF: About 60,000 hours at full load and 25°C condition by MIL-HDBK-217F spec. Construction: Enclosure box with cooling fan. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -65- OUTPUT VOLTAGE / CURRENT RATINGS CHART TRIPLE OUTPUT MAIN VO1 @★#≡⊙ MAIN +VO2 @★≡⊙# AUX. +VO3 @★▲⊙ MODEL NO. Typ. Volt. Typ. Volt. Typ. Volt. HVP500-T033EI 100.0A +3.3V 25.0A +5.0V 4.0A +12.0V HVP500-T033EK 100.0A +3.3V 25.0A +5.0V 3.2A +15.0V HVP500-T033EM 100.0A +3.3V 25.0A +5.0V 2.0A +24.0V HVP500-T050DI 75.0A +5.0V 25.0A +3.3V 4.0A +12.0V HVP500-T050DK 75.0A +5.0V 25.0A +3.3V 3.2A +15.0V HVP500-T050DM 75.0A +5.0V 25.0A +3.3V 2.0A +24.0V Symbol: " " OVP built-in. "@" Adjustable. "⊙" Installed with OR-ing diode. "▲" Installed with magnetic amplifier. "≡" Active load sharing. "#" Remote sense. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 3,500.0g. (7.72 lb.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS AC INPUT TRIPLE OUTPUT ASSIGNMENT AC-L AC-N AC-G CONNECTOR & PIN # L N G VO1 VO2 P1-1~4,12~15,23,24 P2-3,4,15,16 P2-1,2,13,14 VO3 DC COM P2-20,21 P1-5~11,16~22 P2-5,6,7,8,17,18,19 Mating connector: Molex 5557-24 or 42358-24. Remark: <MSR> means output measurement Point. -66- ASSORTED SIGNAL VO2+ VO2- +VO1 +VO2 +VO3 # # MSR MSR MSR P.OK +VO1≡ +VO2≡ VO1+# VO1-# P2-10 P2-11 P2-24 P2-9 P2-12 P2-22 P2-23 P3-1 P3-2 P3-3