Crystal oscillator HIGH-STABILITY HIGH-FREQUENCY OSCILLATOR HG-1012JA / 2012JA Product number (please refer to page 3) Q3511JA0xxxxx00 Q3512JA0xxxxx00 • • • • • Cylindrical AT crystal unit built-in, thus assuring high reliability. Excellent heat resistance. Low current consumption. Available for lead (Pb)-free soldering. Available for lead (Pb)-free terminal. Actual size Specifications (characteristics) Item Specifications Symbol Output frequency range HG-1012JA f0 1.5000 MHz to 28.63636 MHz VDD-GND -0.5 V to +7.0 V Power source voltage Max. supply voltage Operating voltage VDD 5.0 V ±0.25 V Temperature range Storage temperature TSTG -55 ˚C to +125 ˚C Operating temperature TOPR Frequency stability Δf/f0 Remarks HG-2012JA VDD = 4.75 V to 5.25 V Stored as bare product after unpacking -40 ˚C to +85 ˚C AV: ±20 x 10-6, BV: ±25 x 10-6 SV: ±15 x 10-6, AV: ±20 x 10-6 Ta = -20 ˚C to +70 ˚C BX: ±25 x 10 , CX: ±30 x 10 BX: ±25 x 10 Ta = -40 ˚C to +85 ˚C -6 -6 -6 Current consumption Iop 10 mA Max. No load condition Duty tw/ t 40 % to 60 % 1/2 VDD level High output voltage VOH VDD -0.4 V Min. IOH = -0.8 mA Low output voltage VOL 0.4 V Max. IOL = 3.2 mA Output load condition CL 15 pF Output rise time tR 8 ns Max. 20 % → 80 % VDD level tF 8 ns Max. 80 % → 20 % VDD level tOSC 4 ms Max. Output fall time Oscillation start up time Aging Shock resistance Time at 4.75 V to be 0 s fa ±5 x 10 / year Max. ±2 x 10 / year Max. Ta = +25 ˚C, first year S.R. ±10 x 10-6 Max. ±2 x 10-6 Max. Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms x 1/2sine wave in 3 directions -6 -6 External dimensions (Unit: mm) 1 2 3 4 Ts GND OUT VDD 1.3 3.0 8.65 #2 9.8 Max. #1 0.51 Ts terminal should be kept open. 63 0.25 Min. 0.25 8.8 14.0 Max. 5.08 (Unit: mm) NO. Pin terminal 4.06 #3 4.7 Max. #4 Recommended soldering pattern 7.62 5.08