Crystal oscillator SELECTABLE-OUTPUT PLL OSCILLATOR MG-7010SA Product number (please refer to page 2) Q33M11 SAx x x x x 0 0 • Can output one CPU frequency among 15 selections. • Reflow able, high-density mounting-type SMD. • Provided with output enable and stand-by function to allow low current consumption. • Using CMOS IC allows low current consumption and assures high reliability. Actual size Specifications (characteristics) Item Frequency change time Symbol t ft VDD-GND VDD TSTG TOPR ∆f / f0 lop IOE IST Specifications 10 ms Max. 20.0000 MHz to 120.0000 MHz 20.0000 MHz to 80.0000 MHz -0.5 V to +7.0 V 2.7 V to 5.5 V -55 °C to +100 °C -20 °C to +70 °C C: ±100 x 10-6 45 mA Max. 25 mA Max. 10 µA Max. Output frequency range f0 Duty tw/t 40 % to 60 % 1.4 V level High output voltage Low output voltage VOH VOL Output load condition CL High input voltage Low input voltage Output rise time Output fall time Oscillation start up time Aging VIH VIL tTLH tTHL tOSC fa VDD -0.5 V Min. 0.4 V Max. 25 pF Max. 15 pF Max. 2.0 V Min. 0.8 V Max. 4.0 ns Max. 4.0 ns Max. 10 ms Max. ±5 x 10-6/year Max. IOH = -16 mA (VDD=5±0.5 V) IOL = 16 mA (VDD=5±0.5 V) VDD=4.5 V to 5.5 V( f0 ≤ 80 MHz) VDD=2.7 V to 4.5 V or f0 > 80 MHz ST,OE terminal ST,OE terminal 20 %→80 %VDD level 80 %→20 %VDD level Time at 4.5 V to be 0 s Ta=+25 °C, VDD =5.0 V / 3.0 V, First year Shock resistance S.R. ±20 x 10-6 Max. Power source Max. supply voltage voltage Operating voltage Storage temperature Operating temperature Temperature range Frequency stability Current consumption Output disable current Standby current Remark S0, S1, S2, S3 changing VDD=4.5 V to 5.5 V VDD=2.7 V to 5.5 V Stored as bare product after unpacking -20 °C to +70 °C, VDD=2.7 V to 5.5 V No load condition (fo=120 MHz) OE=GND, fo=120 MHz ST=GND _ _ _ Three drops on a hard board from 750 mm or excitation test with 29400 m/s2 x 0.3 ms 1/2 sine wave in 3 directions Output frequency Output frequency (MHz) Select bit S3 S2 S1 S0 100.0 33.33 30.0 120.0 25.0 20.0 70.0 80.0 75.0 66.66 60.0 60.0 50.0 45.0 90.0 40.0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 External dimensions 6 5.0 7 1.27 Terminal connection Terminal No. 1 2 4 5 Terminal symbol S3 GND S0 S1 6 OE 7 ST Stand by control “H ” → Clock out “ L ” → “Level” 8 13 14 VDD OUT S2 Power supply Clock output Frequency select bit 2 3, 9, 10 11, 12 N.C No connection __ 0° to 10° 0.35 0.15 3 4 5 10.1±0.2 3.1 2 7.4±0.2 M7010 C E 935 6A 1 (Unit: mm) 8 3.2 ± 0.1 14 13 12 11 10 9 0.05 Min. 0.6 Metal may be exposed on the top or bottom of this product. This won't affect any quality, reliability or electrical spec. Function Frequency select bit 3 Ground Frequency select bit 0 Frequency select bit 1 Output Enable control Clock out at “ H ” high-impedance at “ L ” 72