ETC OM5262SA

OM5262SA/RA/DA
HERMETIC JEDEC TO-254AA HIGH EFFICIENCY,
CENTER-TAP HIGH VOLTAGE RECTIFIER
24 Amp, 1000 Volt, 65 ns trr Soft Recovery
FEATURES
•
•
•
•
•
•
•
•
•
Soft Recovery Characteristics
Hermetic Metal Package, JEDEC TO-254AA
Very Low Forward Voltage
Very High Reverse Voltage Capability
Very Low Reverse Recovery Time
Very Low Switching Losses
Isolated Package
Low Thermal Resistance
Available Screened To MIL-S-19500, TX, TXV And S Levels
DESCRIPTION
This soft recovery rectifier is ideally suited as a free wheeling diode in converters and motor
control circuits, as well as a rectifier in SMPS. The package is designed for those
applications where a small size and a hermetically sealed package is desirable.
Center-Tap configuration.
ABSOLUTE MAXIMUM RATINGS (Per Diode) TJ = 25°C
Repetitive Peak Reverse Voltage, VRRM ...........................................................................................1000V
Non-Repetitive Peak Reverse Voltage, VRSM ...................................................................................1000V
Repetitive Peak Forward Current, IFRM................................................................................................150A
RMS Forward Current, I(RMS) ..................................................................................................................25A
Average Forward Current, TC = 100°C, Duty Cycle = 50%, IF(AV) ........................................................12A
Surge Non-Repetitive Forward Current, 8.3ms, IFSM ............................................................................75A
Power Dissipation, TC = 100°C, P ........................................................................................................25W
Storage and Junction Range, Tstg .......................................................................................-55°C to 150°C
Thermal Resistance, Junction-To-Case, Rth(JC).............................................................................2.4°C/W
PIN CONNECTION
SCHEMATIC
1
2
1
2
3
COMMON
ANODE
3
COMMON
CATHODE
OMXXXXRA
1
3
OMXXXXSA
.545
.535
.144 DIA.
.050
.040
.800
.790
.685
.665
1
2
.550
.530
3
DOUBLER
OMXXXXDA 2
.550
.510
Common cathode is standard. Contact the factory for performance
characteristics for common anode and doubler.
Standard Products are supplied with glass feedthroughs.
For ceramic feedthroughs, add the letter “C” to the part number.
Example - OMXXXXCSA.
4 11 R1
Supersedes 2 07 R0
3.2 - 69
.005
.045
.035
.150 TYP.
.150 TYP.
.260
.249
Z-Tab package also available.
3.2
OM5262SA/RA/DA
ELECTRICAL CHARACTERISTICS
STATIC CHARACTERISTICS
Symbol
Test Conditions
TJ = 25°C
I
R
R
TJ = 25°C
F
Typ.
V =V
TJ = 100°C
V
Min.
RRM
F
Unit
50
µA
2.5
mA
1.9
I = 12A
TJ = 100°C
Max.
1.8
V
RECOVERY CHARACTERISTICS
Symbol
Test Conditions
T = 25°C
t
rr
Min.
Typ.
Max.
IF = 1A, dIF/dt = -15A/µs, VR = 30V
155
IF = 0.5A, IR = 1A, Irr = 0.25A
65
J
Unit
nS
TURN-OFF SWITCHING CHARACTERISTICS (Without Series Inductance)
Symbol
t
Test Conditions
dIF/dt = -50A/µs
IRM
V
dIF/dt = -100A/µs
CC
RM
Typ.
= 200V, IF = 12A
120
7.8
J
See Figure 1
dIF/dt = -100A/µs
Max.
200
LP 0.05µH, T = 100°C
dIF/dt = -50A/µs
I
Min.
9
Unit
nS
A
TURN-OFF OVERVOLTAGE COEFFICIENT (With Series Inductance)
Symbol
C=
Test Conditions
VRP
TJ = 100°C
VCC
dIF/dt = -12A/µs
Min.
Typ.
VCC = 200V, IF = IF(AV)
Max.
Unit
4.5
LP 12µH, See Figure 2
To evaluate the conduction losses use the following equations:
VF = 1.47 + 0.026 IF
P = 1.47 x IF(AV) + 0.026 IF2(RMS)
IF
IF
DUT
DUT
LC
LC
dlF/dt
VCC
dlF/dt
VF
VCC
LP
VF
IRM
VCC
VCC
VRP
tIRM
Figure 1:
Turn-off switching characteristics
(without series inductance).
Figure 2:
TYPICAL REVERSE CURRENT
TYPICAL FORWARD VOLTAGE
3.2
IR, REVERSE CURRENT (mA)
100
IF, INSTANTANEAOUS
FORWARD CURRENT (AMPS)
70
50
30
20
TC = 100°C
10
7.0
5.0
Turn-off switching characteristics
(with series inductance).
10
1.0
0.1
TC = 100°C
0.01
0.001
TC = 25°C
100
TC = 25°C
3.0
VR, REVERSE VOLTAGE (VOLTS)
2.0
1.0
.8
1.0
1.2
1.4
1.6
500
1.8
VF, INSTANTANEAOUS VOLTAGE (VOLTS)
205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246
1000