• SIP PACKAGE, 0.86 x 0.36x 0.44 INCH • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED • 2:1 WIDE INPUT VOLTAGE RANGE • LOW RIPPLE & NOISE • UL94-V0 CASE POTTING MATERIALS • INPUT TO OUTPUT ISOLATION UP TO 1KV • CONTINUOUS SHORT CIRCUIT PROTECTION • EXTERNAL ON/OFF CONTROL The PDL02 series offer 2 watts of output power from a 21.8 x 9.2 x 11.1 mm package without derating to 85ºC and without external input/output capacitor. The PDL02 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 1000VDC of isolation, short-circuit. The safety meets to EN60950 and UL60950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 2 Watts max Voltage accuracy Full load and nominal Vin ± 2% Minimum load (Note 1) Line regulation 25% of FL LL to HL at Full Load ± 0.5% Load regulation 25% to 100% FL ± 0.75% Ripple and noise 20MHz bandwidth 50mVp-p Temperature coefficient 300pF, max Safety standard pending Switching frequency IEC60950, UL60950, EN60950 Full load to minimum load 100 to 650KHz Potting material Silicon (UL94-V0) 0.86 X 0.36 X 0.44 Inch (21.8 X 9.2 X 11.1 mm) 15VDC 36VDC 50VDC 100VDC 400mAp-p max 150mAp-p max 380mAp-p max 170mAp-p max 1mS typ Weight 4.8g (0.17oz) 5.107 x 106 hrs MTBF (Note 3) ENVIRONMENTAL SPECIFICATIONS Operating temperature range -40ºC to +85ºC Storage temperature range -55ºC to +105ºC Cooling Nature convection Thermal shock MIL-STD-810D Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Remote ON/OFF DC-DC ON DC-DC OFF Nominal input Open or high impedance Control pin applied current 3 ~ 6mA max(via 1K) 1mA max 5V input Meet EN55022 classes B recommend 12V input circuit with external L-C filter at input (Note 24V input 4) 48V input 100uF & 10uH 100uF & 10uH 10uF & 120uH 10uF & 120uH EMC external circuit Application circuit DC-DC OFF DC-DC ON -Input Isolation capacitance None Nominal Vin and constant resistor load 1KΩ 9 Base material 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC 5V input 12V input 24V input 48V input Reflected repple current 5V input (100uF) There is an external 12V input (100uF) capacitor at input (Note 2) 24V input (10uF) 48V input (10uF) 4mA current Source 10 ohms, min Dimensions 5V nominal input 12V nominal input 24V nominal input 48V nominal input Input surge voltage 100mS max +Input Isolation resistance 500uS typ Capacitor type Remote off input current 1000VDC, min Non-conductive black plastic Continuous, automatics recovery Input filter Start up time Isolation voltage Case material INPUT SPECIFICATIONS Input voltage range See table 0.1% / ºC, max Transient response recovery time 25% load step change Short circuit protection Efficiency +Input ctrl 4mA current Source -Input 1KΩ + + DC-DC ctrl Input - Converter Output - Model Number Input Range Output Voltage PDL02-05S33 PDL02-05S05 PDL02-05S09 PDL02-05S12 PDL02-05S15 PDL02-12S33 PDL02-12S05 PDL02-12S09 PDL02-12S12 PDL02-12S15 PDL02-24S33 PDL02-24S05 PDL02-24S19 PDL02-24S12 PDL02-24S15 PDL02-48S33 PDL02-48S05 PDL02-48S09 PDL02-48S12 PDL02-48S15 4.5 – 9 VDC 4.5 – 9 VDC 4.5 – 9 VDC 4.5 – 9 VDC 4.5 – 9 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC Output Current Min Load Full Load 125mA 100mA 55mA 42mA 33mA 125mA 100mA 55mA 42mA 33mA 125mA 100mA 55mA 42mA 33mA 125mA 100mA 55mA 42mA 33mA 500mA 400mA 222mA 167mA 134mA 500mA 400mA 222mA 167mA 134mA 500mA 400mA 222mA 167mA 134mA 500mA 400mA 222mA 167mA 134mA (6) (7) Input (5) Current Eff (%) Capacitor Load max 540mA 645mA 596mA 598mA 582mA 208mA 234mA 222mA 219mA 220mA 102mA 115mA 109mA 109mA 108mA 52mA 60mA 56mA 55mA 55mA 65 66 71 71 73 70 75 79 80 80 71 76 80 80 81 70 73 78 79 79 2200uF 1000uF 470uF 170uF 110uF 2200uF 1000uF 470uF 170uF 110uF 2200uF 1000uF 470uF 170uF 110uF 2200uF 1000uF 470uF 170uF 110uF Note 1. The PDL02 series required a minimum 25% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. It is no damage on the device without external input capacitor. There is smaller reflected ripple current when put a capacitor at input. The capacitor recommended use “CHEMICON” LXZ series or equivalent for 05 & 12Vin. use “CHEMICON” KMF series or equivalent for 24 & 48Vin. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment). The PDL02 series cannot meet EN55022 classes A if there is no filter at input. The filter capacitor recommended is same as note2. Maximum value at nominal input voltage and full load. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. 2. 3. 4. 5. 6. 7. 0.36 (9.20) OUTPUT POWER (%) BOTTOM VIEW 0.08 (2.01)±0.5 .0.01 (0.32) Rectangular pin 0.86(21.80) PDL02-48S33 Derating Curve FRONT VIEW 0.44 (11.10) 0.02 (0.50) 100 0.16 (4.10)±0.5 75 Nature convection 50 1 2 3 5 6 7 8 0.02 (0.50)±0.05 0.10(2.54) 25 0 -40 -25 -10 0 0.70(17.78) 50 60 70 80 90 100 1. ALL DIMENSIONS IN INCHES(mm) AMBIENT TEMPERATURE (ºC) 2 PIN PITCH TOLERANCE 0 02(0 5) PDL02-48S33 Efficiency VS Output load PDL02-48S33 Efficiency VS Input voltage 72 71 70 69 68 67 66 65 60 55 50 EFFICIENCY (%) EFFICIENCY (%) 0.13 (3.20) 36 40 45 50 55 60 INPUT VOLTAGE (V) 65 70 75 PIN CONNECTION 72 71 70 69 68 67 66 65 60 55 50 0.1 0.2 0.3 0.4 OUTPUT LOAD (A) 0.5 PIN DEFINE 1 2 3 5 6 7 8 - INPUT + INPUT CTRL NC + OUTPUT - OUTPUT NC