TECHNICAL DATA NPN POWER SILICON TRANSISTOR Qualified per MIL-PRF-19500/412 Devices Qualified Level 2N3846 JAN JANTX JANTXV 2N3847 MAXIMUM RATINGS Ratings Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current Total Power Dissipation Symbol VCEO VCBO VEBO IC @ TA = +250C (1) @ TC = +1000C (2) Operating & Storage Temperature Range PT Top, Tstg 2N3846 200 300 2N3847 300 400 10 20 4.0 150 -65 to +200 Units Vdc Vdc Vdc Adc W W 0 C THERMAL CHARACTERISTICS Characteristics Thermal Resistance, Junction-to-Case 1) Derate linearly 26.6 mW/0C to +1750C 2) Derate linearly 2 W/0C to +1750C Symbol RθJC Max. 0.5 Unit C/W TO-63* 0 *See Appendix A for Package Outline ELECTRICAL CHARACTERISTICS Characteristics Symbol Min. Max. Unit 2N3846 2N3847 V(BR)CEO 200 300 2N3846 2N3847 ICES 2 2 mAdc 2N3846 2N3847 ICEO 5 5 mAdc OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage IC = 200 mAdc; IB = 0 Collector-Emitter Cutoff Current VCE = 300 Vdc; VBE = 0 VCE = 400 Vdc; VBE = 0 Collector-Emitter Cutoff Current VCE = 200 Vdc; IB = 0 VCE = 300 Vdc; IB = 0 Emitter-Base Cutoff Current VBE = 10 Vdc; IC = 0 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 IEBO Vdc 250 µAdc 120101 Page 1 of 2 2N3846, 2N3847 JAN SERIES ELECTRICAL CHARACTERISTICS (con’t) Characteristics Symbol Min. Max. hFE 70 40 12 240 60 Unit ON CHARACTERISTICS (3) Forward-Current Transfer Ratio IC = 1 Adc; VCE = 3.0 Vdc IC = 5 Adc; VCE = 3.0 Vdc IC = 10 Adc; VCE = 3.0 Vdc Base-Emitter Voltage VCE = 3 Vdc; IC = 10 Adc Base-Emitter Saturated Voltage IB = 1.6 Adc; IC = 10 Adc Collector-Emitter Saturated Voltage IB = 1.6 Adc; IC = 10 Adc VBE 1.20 VBE(sat) 1.30 VCE(sat) 0.75 Vdc Vdc Vdc DYNAMIC CHARACTERISTICS Magnitude of Common-Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 1.0 Adc, VCE = 10 Vdc, f = 1 MHz Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 5 Adc, VCE = 10 Vdc, f = 1 kHz Output Capacitance VCB = 10 Vdc, IE = 0, 100 kHz ≤ f ≤ 1.0 MHz hfe hfe Cobo 10 35 50 250 750 pF SWITCHING CHARACTERISTICS Turn-On Time VBE(off) ~ -7.5 Vdc; IC = 10 Adc; IB1 = 2 Adc; IB2 = -2 Adc; RL = 15Ω Turn-Off Time VBE(off) ~ -7.5 Vdc; IC = 10 Adc; IB1 = 2 Adc; IB2 = 2 Adc; RL = 15Ω on 4 µs off 7 µs t t SAFE OPERATING AREA DC Tests TC = +1000C; VCE = 0 Vdc, IC = 0 Adc (See Figure 3 on Mil-PRF-19500/412) Test 1 VCE = 7.5 Vdc; IC = 20 Adc; tp = 1.0 s; 1 cycle Test 2 VCE = 200 Vdc; IC = 100 mAdc; tp = 1.0 s, 1 cycle Test 3 VCE = 58 Vdc; IC = 1.0 Adc; tp = 1.0 s, 1 cycle Burnout by Pulsing (2N3847 only) TC = +1000C; VCE = 300 Vdc; IC = 20 mAdc; tp = 1.0 s, 1 cycle Unclamped Inductive Sweep TC = +1000C; IC = 20 Adc; IB = 2 Adc (See Figure 4 on Mil-PRF-19500/412) Clamped Inductive Sweep TC = +1000C; IC = 20 Adc; IB = 2 Adc (See Figure 5 on Mil-PRF-19500/412) 3) Pulse Test: Pulse Width = 300µs, Duty Cycle ≤ 2.0%. 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 794-1666 / Fax: (978) 689-0803 120101 Page 2 of 2