AZ832 POLARIZED DIP RELAY SINGLE SIDE STABLE FEATURES • • • • • • • Low profile for compact board spacing DC coils to 48 VDC High sensitivity, 96 mW pickup Life expectancy to 20 million operations High switching capacity, 150 W, 250 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning • Meets FCC Part 68.302 1500 V lightning surge • Meets FCC Part 68.304 1000 V dielectric • UL file E43203; CSA file LR702225 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Max. switched power: 150 W or 250 VA Max. switched current: 5 A Max. switched voltage: 250 VDC or 250 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL/CSA 2 A at 25 VDC resistive 1 A at 120 VAC resistive Material Gold plated silver against palladium silver. Gold plated palladium silver against palladium silver (Suffix “A”) Resistance < 50 milliohms initially COIL Power Life Expectancy Mechanical Electrical Minimum operations 2 x 107 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC Operate Time (typical) 3 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Bounce (typical) 3 ms Dielectric Strength (at sea level) 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 115°C (239°F) At Pickup Voltage (typical) Standard coil: 128 mW Sensitive coil: 96 mW Vibration 50 g at 10–500 Hz Max. Continuous Dissipation 0.9 W at 20°C (68°F) Shock 50 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams Temperature Max. 115°C (239°F) NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 5. Relay adjustment may be affected if undue pressure is exerted on relay case. 6. Specifications subject to change without notice. ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000--11-17 AZ832 RELAY ORDERING DATA STANDARD COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 6.4 Coil Resistance ± 10% 45.0 Must Operate VDC 2.4 5 10.6 125 4.0 AZ832–2C–5DE 6 12.7 180 4.8 AZ832–2C–6DE 9 19.1 405 7.2 AZ832–2C–9DE 12 25.5 720 9.6 AZ832–2C–12DE 24 50.9 2,880 19.2 AZ832–2C–24DE 48 101.8 11,520 38.4 AZ832–2C–48DE ORDER NUMBER* AZ832-2C-3DE** NON-SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC 3 Max. Continuous VDC 5.7 Coil Resistance ± 10% 36 Must Operate VDC 2.25 5 9.2 95 3.75 AZ832–2C–5DME 6 11.0 150 4.5 AZ832–2C–6DME 12 23.2 600 9.0 AZ832–2C–12DME 24 44.6 2210 18.0 AZ832–2C–24DME 48 93.7 9750 36.0 AZ832–2C–48DME ORDER NUMBER* AZ832-2C-3DME** SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 12.3 Coil Resistance ± 10% 167 14.5 240 6 Must Operate VDC 4.0 ORDER NUMBER* AZ832–2C–5DSE 4.8 AZ832–2C–6DSE 9 21 540 7.2 AZ832–2C–9DSE 12 29 960 9.6 AZ832–2C–12DSE 24 57 3840 19.2 AZ832–2C–24DSE *Add suffix “A” for gold plated palladium silver against palladium silver contact material. **3 V coils not UL/CSA approved MECHANICAL DATA PC BOARD LAYOUT MECHANICAL DATA .048 [1.21] .026 [0.66] .118 [3.00] .047 [1.19] 1 4 6 8 16 13 11 9 .300 [7.62] .419 MAX. [10.65] 8 x ø.039 [ø1.0] .048 [1.21] 8x .024±.005 [0.61±0.12] 2x .200 [5.08] 8x .012±.005 [0.30±0.12] WIRING DIAGRAM .024 REF. [0.61] .012 REF. [0.30] .300 [7.62] .394 MAX. [10.00] .795 MAX. [20.20] .300 [7.62] 1 4 6 8 16 13 11 9 + (WATCH FOR POLARITY) VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com [email protected] Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700 2000--11-17