AZ946 MINIATURE PC BOARD RELAY FEATURES • • • • • • • • Subminiature size High sensitivity, 288 mW pick up Coils to 24 VDC Epoxy sealed for automatic wave soldering Contacts rated at 1 or 5 Amps Life expectancy to 20 million operations Extremely low cost UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement 2 Form C (DPDT) Max. Ratings Noninductive load: Light Duty Max. switched power: 30 W or 277 VA Max. switched current: 1 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 1 A at 30 VDC resistive 1 A at 277 VAC general use (100k cycles) Medium Duty Max. switched power: 150 W or 1385 VA Max. switched current: 5 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC resistive 5 A at 277 VAC general use (100k cycles) * If switching voltage is greater than 30 VDC special precautions must be taken. Please contact the factory Life Expectancy Mechanical Electrical Minimum operations 2 x 107 1 x 105 (at rated load) Operate Time (typical) 5 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 1000 Vrms coil to contact 750 Vrms between open contacts 1000 Vrms contact set to contact set Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -10°C (14°F) to 60°C (140°F) standard -10°C (14°F) to 70°C (158°F) sensitive -10°C (14°F) to 105°C (221°F) Storage Material Light Duty: Silver, gold plated Medium Duty: Silver Cadmium Oxide, gold plated Resistance Light Duty: 100 milliohms max. initially Medium Duty: 100 milliohms max. (6 V 1 A method) COIL Vibration 0.062" (1.5 mm) DA at 5–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds At Pickup Voltage (typical) 384 mW standard 288 mW sensitive Max.Solvent Temp. 80°C (176°F) Max. Continuous Dissipation 1.2 W at 20°C (68°F) Max. Immersion Time 30 seconds Weight 12 grams Temperature Rise 35°C (63°F) standard 30°C (54°F) sensitive Power Max. Temperature 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Unsealed relays should not be dipped cleaned ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-16 AZ946 RELAY ORDERING DATA COIL SPECIFICATIONS - Medium Duty (5 Amp Contact) Max. Continuous Coil Resistance ORDER NUMBER Nominal Coil Must Operate VDC VDC 3 2.4 VDC 4.2 ±10% 15 Unsealed AZ946–2CH–3D Sealed AZ946–2CH–3DE AZ946–2CH–5DE 5 4.0 7.1 42 AZ946–2CH–5D 6 4.8 8.4 60 AZ946–2CH–6D AZ946–2CH–6DE 9 7.2 12.7 135 AZ946–2CH–9D AZ946–2CH–9DE 12 9.6 16.9 240 AZ946–2CH–12D AZ946–2CH–12DE 24 19.2 33.9 960 AZ946–2CH–24D AZ946–2CH–24DE RELAY ORDERING DATA COIL SPECIFICATIONS - Light Duty (1 Amp Contact) Nominal Coil Must Operate VDC VDC 3 2.4 Max. Continuous Coil Resistance VDC ±10% 4.9 20 ORDER NUMBER Unsealed AZ946–2C–3DS Sealed AZ946–2C–3DSE AZ946–2C–5DSE 5 4.0 8.2 56 AZ946–2C–5DS 6 4.8 9.8 80 AZ946–2C–6DS AZ946–2C–6DSE 9 7.2 14.7 180 AZ946–2C–9DS AZ946–2C–9DSE 12 9.6 19.6 320 AZ946–2C–12DS AZ946–2C–12DSE 24 19.2 39.0 1280 AZ946–2C–24DS AZ946–2C–24DSE MECHANICAL DATA Outline Dimensions PC Board Layout .630 [16.0] .854 [21.7] .400 [10.1] .100 [2.5] .200 [5.1] .060 [1.5] .650 [16.5] .150 [3.8] .500 [12.7] .200 [5.1] 8xø.060 [ø1.5] 8x.138 [3.5] .060 [1.5] VIEWED TOWARD TERMINALS 8x.018 [0.44] Wiring Diagram 8x.039 [1.0] 3 2 4 1 5 8 6 7 VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-16