• FSK15 Series AC/DC Converters Input Parameter Input voltage Conditions/Description AC input DC input Line frequency Min Max Units 85 110 Nom 264 340 VAC VDC 47 400 Hz Input current @110VAC @220VAC 0.31 0.16 Amps Amps Inrush current (cold start) @110VAC @220VAC 30 60 Amps Amps Leakage current @110VAC @220VAC 0.5 0.75 mA mA Max Units Output Parameter Conditions/Description Set point accuracy Line regulation 2 (Low line to high line) Single & dual output models -2% -1.0% +2% +1.0% Load regulation, static 2 Main output Aux. outputs -1.0% -2.0% +1.0% +2.0% Load regulation, dynamic 2 Temperature drift Hold-up time Main output -3.0% -1.0% 10 +3.0% +1.0% Minimum load Ripple & noise Min Nom ms 0.0 20 MHz bandwidth 1.0%Vout Amps mVpp Max Units Note 2. To maintain specified regulation, it is required to have a minimum 10% load on the main output, and a 20% load on each auxillary output. Under no load conditions, operations will not damage the devices, but all specified regulation may not be met. Protection Parameter Conditions/Description Over-current Over-voltage Over-temperature Continuous auto recovery 3 Internal clamping Thermal shut d own Note 3. Min Nom 105% 115% 135% 140% 145 °C Continuous operation in a protected state may compromise long-term reliability. General Parameter Conditions/Description Efficiency Typical at full load Min Nom Max Units Isolated Dielectric withstand Input/Output Input/FG Output/FG 3K 2K 0.5K VAC VAC VAC Isolated Insulation resistance Input/Output @ 500VDC Input/FG Output/FG 100M 100M 70M Ohms Ohms Ohms Agency standards Case material Material flammability MTBF Operating temperature Storage temperature Vibration Impact Designed to meet UL1950, EN60950, CISPR22, CE, CB, FCC class B Humidity Weight Operating (non-condensing) 75% Zn 94 V-0 250k MIL-HDBK-217F 10G, 10~55Hz, for 3 minutes 50G on X, Y & Z-axis, for 11ms, V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 -10 -20 10 20% +60 +70 55 90% 100 1-866-372-1258 hours °C °C Hz RH grams w w w . v- inf init y .c om • FSK15 Series AC/DC Converters Pin assignments Single SingleOutput 1. FG 2. AC(N) 3. AC(L) 4. 5. 6. 7. 8. No pin +Vout No pin -Vout No pin Dimensions All dimensions are in mm. Outside edge 70 9 7 9 9 6 2 6 9 21 5 5 9 3 4 9 21 9 OUT 45 IN 8 15 15 7 2 1 9 8 1 3 Label 4 8- 1.3 62 19.5 TOP VIEW 8- 1.0 4 62 4 © V-INFINITY ® The information and specifications herein are believed to be correct at time of publication. However, V-INFINITY LLC ac cepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. V-INFINITY LLC, 9615 SW Allen Blvd., Suite 103, Beaverton, OR 97005 1-866-372-1258 www.v-infinity.com