T-1-3/4, Right-Angle LED Assembly G66B and G67B Series The G66B and G67B series of right-angle indicators are shorter front to back than the G621B and G641B. These two series are useful where the extra 3 mm length behind the body cannot be accommodated in the design. In addition to the variety of lamps listed below, most T-1-3/4 LEDs can be special ordered. 3.5±.5 6.1 5.0±.5 6.2 4.7 6.1 6.2 4.8 3.2 3.5 min 3.5 min 5.2 5.2 G66B G67B + – (Pinout for single color) Red or yellow Anode Green Anode (typ for bi-color) Specify part desired as follows: G66B/ or G67B/Order Code Please note the G66B series is not available with a built in resistor. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 2.0 36 5-10 TInted Diffused Resistor Required Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Hi Eff Red I5 635 - 4.5 36 5V Green G5 565 - 4.5 36 5V Yellow Y5 585 - 4.5 36 5V Hi Eff Red IB 635 - 4.5 36 12 V Green GB 565 - 4.5 36 12 V Yellow YB 585 - 4.5 36 12 V Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-35