T-1-3/4 (5 mm) Panel Mount LED Indicator G53M and G55M Series The G53M and G55M series of indicators are made of chrome-plated brass. Any of IDEA's standard T-1-3/4 lamps may be used. These assemblies are furnished with matching lock washer and nut. Recommended for panels up to 3 mm (1/8”) thick. Recommended hole size is 8 mm (or 5/16”). For the convenience of OEM users, IDEA can furnish both of these series with wires attached. Black plating is also available on special order to volume users. 5.0Ø G53M 10.0 Anode 2.5 15.5 max 5.0Ø G55M 10.0 Anode 3.5 12.5 max Specify part desired as follows: G53M/Order Code or G55M/Order Code For example: “G53M/G” designates an assembly with a green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 2.0 36 5-10 TInted Diffused Resistor Required Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Hi Eff Red I5 635 - 4.5 36 5V Green G5 565 - 4.5 36 5V Yellow Y5 585 - 4.5 36 5V Hi Eff Red IB 635 - 4.5 36 12 V Green GB 565 - 4.5 36 12 V Yellow YB 585 - 4.5 36 12 V Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-50