53.34mm [2.100"] 53.34mm [2.100"] Top View 6 26.64mm [1.049"] 1 4 34.44mm[1.356"] assembled 3 Side View 5 1 Substrate: 1.59mm ±0.18mm [0.0625" ±0.007"] FR4/G10 or equivalent high temp material. 17µm [1/2 oz.] Cu clad. SnPb plating. 2 Substrate: 3.18mm ±0.18mm [0.125" ±0.007"] FR4/G10 or equivalent high temp material. Non-clad. 3 Pins: material- Brass Alloy 360 1/2 hard; finish0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.). 4 Pins: shell material- Brass Alloy 360 1/2 hard; finish- 0.25µm [10µ"] Au over 1.27µm [50µ"] Ni (min.). Contact material- BeCu; finish 0.25µm [10µ"] Au over 2.54µm [100µ"] Ni (min. ). 5 Leads: material- BeCu Alloy 194; plating- 60/40 SnPb 3.80-10.16µm [150-400µ"]. 6 Test points: material- Phosphor Bronze; plating- Sn over 1.27µm [50µ"] Ni. Gold flash on contact end. Description: CARRIER ADAPTOR 84 position PLCC ZIF socket with test points to 84 position PLCC plug. Tolerances: diameters ±0.03mm [±0.001”], PCB perimeters ±0.13mm [±0.005”], PCB thicknesses ±0.18mm [±0.007"], pitches (from true position) ±0.08mm [±0.003"], all other tolerances ±0.13mm [±0.005”] unless stated otherwise. CA-PLCC084-Z-P-T-01 Dwg © 1993 IRONWOOD ELECTRONICS, INC. PO BOX 21151 ST. PAUL, MN 55121 Tele: (651) 452-8100 www.ironwoodelectronics.com Status: Released Drawing: 6/10/93 FileCA-PLCC084-Z-P-T-01 Dwg Scale: 4:3 Rev: D Date: 9/30/96 Modified:3/31/00