IRONWOOD CA-QFE44SB-L-Z-T-01

2.500"
0.750"
0.200"
0.100" typ.
1.400"
3
Top View
1.968"
0.764"
0.219"
2
0.228"
3
1
0.125" (plugged)
Side View
0.8mm
0.525"
1
Substrate: 0.0625"±0.007" FR4/G10 or equivalent high
temp material. 1/2 oz. Cu clad. SnPb plating
2
Pins: Material- Brass Alloy 360 1/2 hard; finish- 10µ"
Au over 50µ" Ni (min.).
3
Pins: shell material- Brass Alloy 360 1/2 hard; finish10µ" Au over 50µ" Nil (min.). Contact material- BeCu;
finish 10µ" Au over 100µ" Ni (min.)
Description: QFP CARRIER ADAPTOR
44 position (0.8mm pitch) QFP Zero Insertion Force socket with test points to 44 position surface mountable QFP
emulator foot. The foot is designed to replace a 44 pin 0.8mm pitch device. The 2 piece adaptor interconnects via a
gold plated (0.05" center) Mini-grid socket interface.
All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice.
CA-QFE44SB-L-Z-T-01 Drawing
© 1996 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: released
Scale: 2:1
Drawing: K. Krawza
File: CA-QFE044SB-L-Z-T-01 Dwg
Rev: B
Date: 11/13/96
Modified: 5/8/97, MT