Preset counters electromechanic 1 preset, subtracting Display 5 digits, manual/electric reset FS218, FS219 Features –– Large pulse counter with one preset –– Subtracting –– Display 5-digits –– Manual and electric reset Technical data - mechanical design Voltage supply Display White numbers on black Number of digits 5-digits Digit height 8 mm Count mode 1 impulse = 1 count Step-by-step switching Subtracting in 2 half steps Measuring range 99 999 Operating temperature 0...+60 °C 24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 % Ripple residue <48 % Nominal frequency 50 / 60 Hz Pulse ratio 1:1 Service life 100 million impulses Electric reset operations: Approx. 1 million Storing temperature -20...+70 °C Preset 1 preset Relative humidity 80 % non-condensing Output contact Change-over contact by microswitch, one-pole Protection DIN EN 60529 IP 41 Switching voltage 230 VAC / VDC Housing type Built-in housing Switching current 2 A (VAC) 1 A (VDC) E-connection Plug-in terminal connector, 10-pin Switching capacity 100 VA / 30 W Mounting Front panel with 4 screws Limit switch service life 1 million switching cycles Dimensions W x H x L 144 x 72 x 129 mm Spark extinguisher Recommended for inductive load Cutout dimensions 113 x 61 mm (+0.5) Installation depth 129 mm Material Housing: Hostaform POM, black Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Approval CE conform FS218 Reset Manual by button to preset Weight approx. 650 g FS219 1 Reset Manual by button and electric reset to preset Weight approx. 850 g www.baumerivo.com 30/10/2008 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. FS218 - Front panel with screw mount Preset counters electromechanic 1 preset, subtracting Display 5 digits, manual/electric reset FS218, FS219 Trigger level Connection diagram Min. pulse duration 50 ms 50 ms Min. pulse interval 50 ms 50 ms Switch on time (at 25 °C) 100 % 100 % Electr. reset Voltage DC Voltage AC Power 30 W 42 VA Min. pulse duration 300 ms 300 ms Min. pulse interval 9x pulse duration 9x pulse duration Switch on time (at 25 °C) 10 % max. 1 min FS218 DC AC + 1 10 % max. 1 min 2 8 9 10 1 2 3 4 8 Pulse FS219 DC AC 10 End contact End contact Voltage 9 Voltage + 2 +(-) 1 3 Voltage * - 4 1 2 3 4 5 6 Pulse Voltage Reset 9 10 End contact * Also available as normally close. Please indicate when placing order. Accessories Front panels (page %S) Z 100.04A 2 Front panel with transparent protective cover, for socket box 114 x 61 mm www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 5 VA 30/10/2008 4W Reset Power -(+) Voltage AC -(+) Voltage DC +(-) Count Preset counters electromechanic 1 preset, subtracting Display 5 digits, manual/electric reset FS218, FS219 Part number With reset button FS218. 550B With button reset and electrical reset B FS219. 550B B Display B 5-digits 99999 A3 B5 B8 B9 Display B 5-digits 99999 Voltage 24 VDC 24 VAC 110 VAC 230 VAC A3 B5 B8 B9 Reset 550B With reset button Voltage 24 VDC 24 VAC 110 VAC 230 VAC Reset 550B With button reset and electrical reset Dimensions 112 14.6 21 5 134 144 3.5 M4 0.5 Subject to modification in technic and design. Errors and omissions excepted. 10.5 61 +0.5 62 134 129 113 +0.5 3 www.baumerivo.com 30/10/2008 5 72 62 60 6 16 Preset counters electromechanic 1 preset, subtracting Display 5 digits, manual/electric reset 4 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. FS218, FS219