Totalizers electromechanic Small impulse counters, adding Display 4- or 6-digits, with/without reset button F 102, F 112, F 122 Features –– Small impulse counter –– Adding –– Display 4- or 6-digits –– With or without reset button F 102 - Center screw mount at rear Technical data - electrical ratings 24/110 VAC ±10 % (50/60 Hz) 230 VAC +6/-10 % (50/60 Hz) 24 VDC ±10 % Residual ripple <48 % Nominal frequency 50 / 60 Hz Power consumption 2.3 W, 5.5 VA Pulse ratio 1:1 Service life VDC - 100 million impulses VAC - 50 million impulses Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 F 122 - Front panel with spring clips 1 www.baumer.com/motion 7/6/2016 Subject to modification in technic and design. Errors and omissions excepted. F 112 - Front panel with screw mount Voltage supply Totalizers electromechanic Small impulse counters, adding Display 4- or 6-digits, with/without reset button F 102, F 112, F 122 Technical data - mechanical design Connection diagram Display White numbers on black Number of digits 4-digits with reset button 6-digits without reset button 2 -(+) Digit height 4 mm Voltage +(-) Count mode 1 impulse = 1 count 1 Step-by-step switching Adding in 2 half steps Measuring range 9999 and 999 999 Trigger level Zero setting Manual by reset button Ambient temperature 0...+45 °C Max. counting speed 6 pulses/s Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Protection DIN EN 60529 IP 41 Min.pulseinterval120ms Housing type Built-in housing Switchontime(at25°C)30%max.7min Connection Pin connector D = 1.5 mm Cutout dimensions 33 x 22 mm Weight approx. 75 g Material Housing: Hostaform POM, black Encoder Rear center screw mount Dimensions W x H x L 32 x 21.5 x 59 mm Mounting depth 74 mm Front panel with 2 screws Dimensions W x H x L 39 x 37 x 59 mm Mounting depth 72 mm 5.5VA Max. counting speed 10 pulses/s Voltage 24/110VAC±10% Power 3VA Min.pulseduration50ms Min.pulseinterval50ms Switchontime(at25°C)100% Max. counting speed 20 pulses/s F 112 Mounting 230VAC+6/-10% Power Min.pulseduration50ms F 102 Mounting Voltage Voltage 24VDC±10% Power 2.3W Min.pulseduration25ms Min.pulseinterval25ms Switchontime(at25°C)100% Front panel with spring clips Dimensions W x H x L 37 x 25 x 59 mm Mounting depth 72 mm 2 www.baumer.com/motion 7/6/2016 Mounting Subject to modification in technic and design. Errors and omissions excepted. F 122 Totalizers electromechanic Small impulse counters, adding Display 4- or 6-digits, with/without reset button F 102, F 112, F 122 Part number Center screw mount Front panel with screw mount F 102. F 112. Display B 4-digits 9999 D 6-digits 999 999 C3 C5 C8 C9 450L 600N Display B 4-digits 9999 D 6-digits 999 999 Voltage 24 VDC 24 VAC 110 VAC 230 VAC C3 C5 C8 C9 Zero setting With reset button, 4-digits Without reset button, 6-digits 450K 600M Voltage 24 VDC 24 VAC 110 VAC 230 VAC Zero setting With reset button, 4-digits Without reset button, 6-digits Front panel with spring clips mount F 122. Display B 4-digits 9999 D 6-digits 999 999 Zero setting With reset button, 4-digits Without reset button, 6-digits Subject to modification in technic and design. Errors and omissions excepted. 450N 600Q Voltage 24 VDC 24 VAC 110 VAC 230 VAC 3 www.baumer.com/motion 7/6/2016 C3 C5 C8 C9 Totalizers electromechanic Small impulse counters, adding Display 4- or 6-digits, with/without reset button F 102, F 112, F 122 Dimensions F 102 with reset button, 4-digits 6 74 32 M4 21.5 74 M4 2.3 2.3 61 69 61 69 M4 2.3 2.5 4 59 67 0 74 37 21.5 1.75 6 74 25 32 32 2.3 4 59 67 2 2 Subject to modification in technic and design. Errors and omissions excepted. 2.5 ',1$I F 122 without reset button, 6-digits 37 21.5 1.75 F 122 with reset button, 4-digits M4 ',1$I 0 25 F 112 without reset button, 6-digits F 112 with reset button, 4-digits 4 www.baumer.com/motion 7/6/2016 21.5 32 F 102 without reset button, 6-digits