Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Features –– Time and hour counter –– ISI34 - Time range 99999 h 59 min / 99999.99 h –– ISI35 - Time range 9999 h 59 min 59 s / 9999999.9 s ISI34 - Hour counter Technical data - mechanical design Voltage supply Lithium battery (approx. 8 years at 20 °C) Operating temperature -10...+60 °C Display LCD, 7-segment display Storing temperature -20...+70 °C Backlit 24 VDC ±20 %, 50 mA Relative humidity 80 % non-condensing Digit height 8 mm Core cross-section 2.5 mm² fine wire AWG 12 Function Hour counter Protection DIN EN 60529 IP 65 face with seal Count mode Adding Housing type Housing for control panel installation Control NPN, PNP, Pulses 10...260 VAC/VDC Housing colour Deep grey, RAL 7021 Reset Button and electric Dimensions W x H x L 48 x 24 x 48 mm Keylock Yes, electric (keylock) Installation depth 47.7 mm Emitted interference DIN EN 61000-6-4 Mounting Clip frame or screw mount Interference immunity DIN EN 61000-6-2 Cutout dimensions 25 x 50 mm (+0.5) Programmable parameters Time range Weight approx. 50 g Approvals UL/cUL, CE conform ISI34 Number of digits 7-digits ISI35 Number of digits 8-digits 1 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Technical data - electrical ratings Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Type table ISI34 - Hour counter Without backlit With backlit ISI34.010AA01 ISI34.010AB01 ISI34.011AA01 ISI34.011AB01 ISI34.013AA01 ISI34.013AB01 Version NPN PNP AC/DC Brief description Time in: - Hours and minutes - Hours and 1/100 h Time in: - Hours and minutes - Hours and 1/100 h Time in: - Hours and minutes - Hours and 1/100 h Signal input INP A – – Timer AC/DC Signal input INP B Timer NPN Timer PNP External Reset AC/DC Operating mode 99999 h 59 min or 99999.99 h 99999 h 59 min or 99999.99 h 99999 h 59 min or 99999.99 h Without backlit With backlit ISI35.010AA01 ISI35.010AB01 ISI35.011AA01 ISI35.011AB01 ISI35.013AA01 ISI35.013AB01 Version NPN PNP AC/DC Brief description Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Signal input INP A – – Timer AC/DC Signal input INP B Timer NPN Timer PNP External reset AC/DC Operating mode 9999 h 59 min 59 s or 999999.9 h 9999 h 59 min 59 s or 999999.9 h 9999 h 59 min 59 s or 999999.9 h 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. ISI35 - Hour counter Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Part number ISI34.01 A 01 ISI35.01 A Display A Not backlit B Backlit 01 Display A Not backlit B Backlit Design 0 NPN 1 PNP 3 AC/DC Design 0 NPN 1 PNP 3 AC/DC Connection diagram 1 2 3 4 5 6 7 8 approx. 30 VDC approx. 5 VDC n.c. 1 INP B 2 Reset 3 Reset 4 Enable Mode 5 GND 6 (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA AC/DC 7 8 approx. 5 VDC n.c. approx. 5 VDC 1 INP B Reset Reset 2 Common AC/DC 3 INP B Reset 4 Enable Mode 5 GND 6 (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA INP A 7 8 10..260 VAC / VDC 10..260 VAC / VDC Reset Enable Mode GND (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA Subject to modification in technic and design. Errors and omissions excepted. approx. 30 VDC DC, PNP 3 www.baumerivo.com 30/10/2008 DC, NPN Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Trigger level Input NPN input Input circuit Comparator (pin 2) Reset input for DC-Version NPN reset input Pin 3 Input level Low 0...0.7 VDC Input level Low 0...0.7 VDC Input level High 3...30 VDC Input level High 3...30 VDC Input resistance 1 MΩ Input resistance 2,2 MΩ PNP input Comparator (pin 2) Min. pulse time 50 ms Input level Low 0...0.7 VDC Input level High 4...30 VDC Input resistance 100 kΩ AC/DC inputs Optocoupler (pin 1 + 3) Input level Low 0...2 VAC/VDC Input level High 10...260 VAC/VDC Input resistance 160 kΩ Min. pulse time 16 ms NPN control inputs Pin 4 + 5 Input level Low 0...0.7 VDC Input level High 3...5 VDC Input resistance 2.2 MΩ Dimensions ISI34, ISI35 19.3 24 22 x 45 48 2.8 Front frame for screw/clip mount (included with delivery) 1 1 28 4 25x50 53 25x50 32 40 4 4 56 www.baumerivo.com Subject to modification in technic and design. Errors and omissions excepted. 3 30/10/2008 47.7