Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Features –– Time and hour counter –– ISI34 - Time range 99999 h 59 min / 99999.99 h –– ISI35 - Time range 9999 h 59 min 59 s / 9999999.9 s ISI34 - Hour counter Technical data - mechanical design Voltage supply Lithium battery (approx. 8 years at 20 °C) Ambient temperature -10...+60 °C Display LCD, 7-segment display Storage temperature -20...+70 °C Display illumination 24 VDC ±20 %, 50 mA Relative humidity 80 % non-condensing Digit height 8 mm Core cross-section 2.5 mm² fine wire AWG 12 Function Hour counter Protection DIN EN 60529 IP 65 (face with seal) Count mode Adding Housing type Built-in housing Control NPN, PNP, Pulses 10...260 VAC/VDC Housing colour Deep grey, RAL 7021 Dimensions W x H x L 48 x 24 x 48 mm Mounting depth 47.7 mm Mounting Clip frame or screw mount Cutout dimensions 45 x 22.2 mm (+0.3) Weight approx. 50 g Button and electric Keylock Yes, electric (keylock) Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 Programmable parameters Time range Approval UL/cULus ISI34 Number of digits 7-digits ISI35 Number of digits 8-digits 1 www.baumer.com/motion 14/5/2014 Reset Subject to modification in technic and design. Errors and omissions excepted. Technical data - electrical ratings Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Type table ISI34 - Hour counter Without backlit With backlit ISI34.010AA01 ISI34.010AB01 ISI34.011AA01 ISI34.011AB01 ISI34.013AA01 ISI34.013AB01 Version NPN PNP AC/DC Brief description Time in: - Hours and minutes - Hours and 1/100 h Time in: - Hours and minutes - Hours and 1/100 h Time in: - Hours and minutes - Hours and 1/100 h Signal input INP A – – Timer AC/DC Signal input INP B Timer NPN Timer PNP External Reset AC/DC Operating mode 99999 h 59 min or 99999.99 h 99999 h 59 min or 99999.99 h 99999 h 59 min or 99999.99 h Without backlit With backlit ISI35.010AA01 ISI35.010AB01 ISI35.011AA01 ISI35.011AB01 ISI35.013AA01 ISI35.013AB01 Version NPN PNP AC/DC Brief description Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Signal input INP A – – Timer AC/DC Signal input INP B Timer NPN Timer PNP External reset AC/DC Operating mode 9999 h 59 min 59 s or 999999.9 h 9999 h 59 min 59 s or 999999.9 h 9999 h 59 min 59 s or 999999.9 h 2 www.baumer.com/motion 14/5/2014 Subject to modification in technic and design. Errors and omissions excepted. ISI35 - Hour counter Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Part number ISI34.01 A 01 ISI35.01 A Display A Not backlit B Backlit 01 Display A Not backlit B Backlit Design 0 NPN 1 PNP 3 AC/DC Design 0 NPN 1 PNP 3 AC/DC Connection diagram 1 2 3 4 5 6 7 8 approx. 30 VDC approx. 5 VDC n.c. 1 INP B 2 Reset 3 Reset 4 Enable Mode 5 GND 6 (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA AC/DC 7 8 approx. 5 VDC n.c. approx. 5 VDC 1 INP B Reset Reset 2 Common AC/DC 3 INP B Reset 4 Enable Mode 5 GND 6 (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA INP A 7 8 10..260 VAC / VDC 10..260 VAC / VDC Reset Enable Mode GND (-) Backlit 24 VDC ±20 %, (+) Backlit 50 mA Subject to modification in technic and design. Errors and omissions excepted. approx. 30 VDC DC, PNP 3 www.baumer.com/motion 14/5/2014 DC, NPN Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Trigger level Input NPNinput Inputcircuit Comparator(pin2) ResetinputforDC-Version NPNresetinputPin3 Input level Low 0...0.7 VDC Input level Low 0...0.7 VDC Input level High 3...30 VDC Input level High 3...30 VDC Input resistance 1 MΩ Input resistance 2,2 MΩ PNPinput Comparator(pin2) Min. pulse time 50 ms Input level Low 0...0.7 VDC Input level High 4...30 VDC Input resistance 100 kΩ NPNcontrolinputsPin4+5 AC/DCinputs Optocoupler(pin1+3) Input level Low 0...2 VAC/VDC Input level High 10...260 VAC/VDC Input resistance 160 kΩ Min. pulse time 16 ms Input level Low 0...0.7 VDC Input level High 3...5 VDC Input resistance 2.2 MΩ Dimensions ISI34, ISI35 19.3 24 22 x 45 48 2.8 Front frame for screw/clip mount (included with delivery) 1 1 28 4 25x50 53 25x50 32 40 4 4 56 www.baumer.com/motion Subject to modification in technic and design. Errors and omissions excepted. 3 14/5/2014 47.7