Totalizers electronic Small impulse counters and position displays Display LED, 6-digits, programmable N 208 Features –– Totalizer and position display –– Display 6-digits –– Scaling factor and counting mode programmable –– Connection: Incremental encoder or digital sensors –– With reset button Technical data - mechanical design Voltage supply 12...24 VDC Operating temperature -10...+50 °C Current consumption ≤80 mA Storing temperature -20...+70 °C Power consumption 2 W Relative humidity 80 % non-condensing Display LED, 7-segment display E-connection Number of digits 6-digits Plug-in screw terminals Soldering pins (flat) Digit height 7.6 mm Core cross-section 1.5 mm² Function Totalizer Difference counter A - B Parallel counter A + B Difference counter Up/down Position display Protection DIN EN 60529 IP 41 Housing type Housing for control panel installation Dimensions W x H x L 53.2 x 28.2 x 64 mm 60 x 37.5 x 61.3 mm 50 x 25 x 85.8 mm Installation depth 76.8 mm Mounting Spring clip or screw mount Socket box Cutout dimensions 51 x 26 mm Material Housing: Noryl PPO, black Weight approx. 50 g Scaling factor 0.0001...9999.99 Count modes Adding or subtracting A-B (difference counting) A+B total (parallel counting) Up/Down A 90° B phase evaluation Counting frequency 3 Hz, 25 Hz, 10 kHz programmable Measuring range -99 999...+999 999 Data memory >10 years in EEPROM Reset Button and electric Keylock Yes, electric (keylock) Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-4 Interference immunity DIN EN 61000-6-2 Programmable parameters Decimal point Set value Scaling factor Count mode Count frequency Approvals UL/cUL, CE conform 1 www.baumerivo.com 30/10/2008 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. N 208 - Totalizer Totalizers electronic Small impulse counters and position displays Display LED, 6-digits, programmable N 208 Part number N 208. Trigger level 3 A101 Optocoupler inputs Input circuit Control inputs PNP- / NPN-logic Count input Voltage supply 3 12…24 VDC Housing 31 Face dimensions 50 x 25 mm socket box 53 Face dimensions 53.2 x 28.2 mm spring clip mounting 54 Face dimensions 60 x 37.5 mm screw mount Trigger current 9...16 mA Switch-off current <0.5 mA Input resistance 1.65 kΩ Reset input Trigger current 5...8 mA Switch-off current <0.5 mA Input resistance 3.3 kΩ Accessories Front panels (page %S) Z 100.01A Front panel with transparent protective cover, for socket box 50 x 25 mm Front frames (page %S) Z 105.02A Front frame with cylinder lock provided on transparent cover Z 107.01A Front frame, insertion cutout 50 x 25 mm Connection diagram 2 1 + 0V N 208 front panel with screws 37.5 31 25 28.2 25 N 208 with spring clip 50 53.2 12.8 64 3 2.7 50 60 12.8 64 2.7 N 208 with socket box 25 50 18. 5 67. 4 2 www.baumerivo.com 30/10/2008 Dimensions Subject to modification in technic and design. Errors and omissions excepted. Supply voltage 3 NPN Br. 3-2 PNP Br. 3-1 4 Count B 5 R eset Count A 6